Search results

G'day If any one has a complaint about Weber customer sevice http://aussiecue.dudeworld.com.au/STC/index.php?topic=865.0 These people are the best Regards dave

G'day I first painted mine in Hi temp paint... No primer needed. How wrong that was. As soon as it was warm it got sticky enough to hold a finger print. Stripped that and used a Etch Primer and then used an engine block paint Ie A lower temp paint. No probs then. So the leason I learnt...

G'day John That is one seriously good looking "Q" Well done Regards dave

http://tvwbb.com/showthread.php?50524-Has-the-2200-Fixed-Regulator-Issues G'day Recon this is the one if it helps Regards dave

No problems to date. Trust me I will report any problems. Ive done a bare metal etch primer then engine block paint job here. Even though its a rattle can spray job, i think ive done it correctly and the extra effort should see it last.

gday http://aussiecue.dudeworld.com.au/STC/index.php?topic=210.0 I used the lid attached to the bottom as previously said Makes it stable. When it come to a perfect fit, there is none, you just do the best you can.

G'day No way a BBQ would get hot enough temp to bake the paint. I painted my mini WSM with caliper paint and as soon as it got hot the paint got sticky. Stripped it and used engine block paint, no problems then. Only diference with the Q is I used a hi gloss over the lid. Dave

G'day Yes it's engine paint rated at 350C. You can get caliper paint rated to 1000C but you need to bake that in an oven to harden. Regards Dave

G'day My Weber Q is near on 6 years old and even though undercover is only 1 km or .6 of a mile off Morten bay Brisbane QLD Australia. No fault of Weber its starting to corrode. Time for a refurbishment. Don't have a sandblaster so it's a chemical stripper. Bare Aluminium you've got to use a...

G'day Ask Weber and they will supply you with 2 small clips which will convert it. I have a Q200 with the new split grills works like a charm and the thicker ceramic means no rust Regards dave

G'day After using the grill scape any food stuffs away cold leave any oil and oil if it's dry. Don't burn off your rust protection. When you go to use the grill flash it up for 10 mins. Then use a wire brush to clean the bars up and it's ready to go. Any food stuffs and oils are carbon. The...

G'day http://aussiecue.dudeworld.com.au/STC/index.php?topic=320.0 Link now contains PICS of home built rotisserie, have also included one of dimension's in inches for a rotisserie suitable for A Q200 regards Dave

G'day To make the pot and the lid fit better a strip of aluminium bent and pop riveted to the top of the pot should do. Bending the aluminium into a circle isn't hard. I opened the jaws on my vise an inch and slowly bent into a circle inch by inch. I also used a fork in a tree branch to correct...

Gday Mick Yes I know your frustration http://aussiecue.freeforums.net/thread/647 Should link you to a few pics I basically used an oversized pot from BCF and used the lid riveted on the bottom to make it stable on the base. Then I used strips of aluminium riveted inside the top to bring it back...

G'day Scott Still some tweaking to do but its build able And cooks a great chicken http://aussiecue.dudeworld.com.au/STC/index.php?topic=320.0 Regards dave

G'day Scott Had up to this point thought that the rotisserie was only for the biggest Q BBQ but after a search on the Aussie weber site it fits them all. Thank you for the information. I've seen one fitted to a "family Q" and I'd love one. Problem is there $180 au and a complete Q220 is $340au...

G'day I have an oversize pot for the lid. Necked it to fit with a piece of 4 mm aluminium stock to form a lip that the lid seals too. Left a 3 mm gape for temperature prob wires. It works well as I'm able to remove both racks meat and probs wires and all in one piece without removing the probe...

G'day Thanks for your very descriptive reply. I'm getting to the stage where the Q looking pretty tacky and I'd really love to keep her after all her years of continuous service. Regards dave

G'day My weberQ is coming up to 5 years old now and starting to get a bit tacky looking. How did you prep and prime the surface. The Qs are high temp powder coated aluminiun and both surfaces are hard to get paint to stick to. So for this reason I've been reluctant to start painting mine. Seeing...

G'day Don't blame you those chimney starters are expensive and too big for a doz beads. Go and have a look at one you'll soon figure out how to make one. My mini chimney is an old stainless steel cultry holder. The handles a U shaped piece of aluminum stock pop riveted to the side a couple of...