Search results

I'd take it back to the store for a refund. No matter how you configure it, the burner valves will still be in the on position on the grill. If the device fails to totally shut off the NG, you will be pouring NG into the grill and surrounding area looking for an ignition source. I've...

Barn Cats work pretty well.

The front has a tab that rides on the bottom lip of the right side frame that the stainless sits in and the rear end has a bolt up to the rear frame. Piece is sort of a U channel piece of stock with about a 2" 90 to get it up to the frame. Also has a notch cutout for where the gas hose...

oops! That's a different critter than the Genesis E-310

the 2007 manifold besides the two bolts to the firebox had a crossmember under the valves that eliminated the issue you describe. 2008-2010 had wings on the manifold that ride in slits in the front and rear frames. Sounds like you have one of each. The 2007 should have a separate igniter...

Ben: Not sure if this is a regular Genesis model 2007-2010 models have stainless steel side shelves in the grey metal frames . Attached is a link to what they would look like. https://www.ereplacementparts.com/weber-3840101-2007-genesis-310-grill-parts-c-193079_193087_193254.html

some cool summer colors there!

Easy way to determine if it is a 2007 Genesis is the manifold is supported by a cross member under the valves. 2008-2010 models have wings on the manifold that sit in slots on the frame. 2007 models also have a separate ignitor vs. the 2008-2010 which it is attached to the front burner. Just...

Did it have the side panels? They weren't in the photo.

I disassembled mine at the sellers house in Utah. It came apart very easily. Base and upper parts fit in the trunk of our Taurus and a garbage bag held the lava rock and a container with the bolts and nuts. I forgot to mention the ceramic logs too. Being disassembled made it much easier to...

Our over the range microwave/hood started doing things on its own in February, beeping, turning itself on. We plug it in now when we need to use the thing. We are now used to 1200 watt and ordered a Kitchenaid which was backordered until May. That model keeps pushing back now to the end of...

Michael, If you can get the old battery out, try putting a new battery in (positive side in) and try jumping from the negative terminal to the spring that wraps around the battery. If you get spark at the ignitor, all you need is the button posted above. If you don't, replace the whole thing...

Rich is on the money. BOTH cat and dog foods are in short supply. Our cats eat only certain brands and Chewy is frequently out. We now buy it from any vendor that has it in stock. Also the prices are up across the board. Royal Canin seems to be particularly hard hit. Our son has...

I use it when doing steaks on the Genesis. Works pretty well on the stainless grates, but too expensive for burgers.

Just filled up at Sams Club. Price 15 minutes ago was $4.49.9 a gallon for regular. Not sure how long that will last. They ran out of all fuel 2 days ago at 2pm

Check the contact strips on the button and clean them. Quite often that is the issue as these have to make contact with the spring to complete the circuit. Also check the battery contacts in the button and the bottom of the ignitor pack. Worth a shot to save a few bucks.

Good Old JD No7 with ginger ale or Vernors.. Been drinking it for close to 50 years. Not a fan of any of their other offerings. For very special occasions, I have some JW Blue Label, but only for very special times. I once took the tour in Lynchburg while in Nashville at a conference. Did...

You can narrow down the years a little more by knowing how the manifold is supported on the frame and how the ignitor is configured. 2008 model year has a cross member bracket holding the manifold up under the valves and the ignitor goes through a separate hole in the firebox. 2009-2010 have...

Nice save and restoration! A great grill which will cook better than the N-S burner configs. I like the casters and may have to do that on my 2008 and my son's 2008 since that roller casters are a pain. Happy grilling!!!

Congrats to you and Barb. We're a little behind you crossing the 39 year mark last July. Many more years for you two!