Search results

The HM can be used without the Pi, But, you would also not have a Wife connection. The Pi is needed for doing data collection, and Internet.

The Rpi needs the SD card in at all times. Without the SD card it does not boot up. Basically, the memory is wiped clean everything you turn off its power and the SD card is its brains. Once SD the SD card is installed, you just leave it installed.

Since I have the double pan, my heatermeter stays pretty cool. It's not hot at all. Mine only gets hot around the fire box area. That being said dont do what I did and route the cat5 cable inside the smoker. My last smoke I tried to hook it up to the blower and my HM would stop working...

The crazing can be removed by using a heatgun.

I only use Esun PET, can get on Amazon. I print it a 240°

They do, but you can only use one or so, and you need thermowork probes. With adapter board you can have 50 feet between the probes and the heatermeter

After getting my Makergear turned for PET, that's all I print, now

I have had a bfb1012hh for years. It's a 28cfm blower. On the gravity feed, I run it at 100%. I had it on my UDS and had a max of 30%.

Roxul to expensive, you can get rock wool at Zoro.com much cheaper and free shipping

http://gravityfeed.servebeer.com/luci Large gravity feed smoker Small pork shoulder No special settings, basically stock, I'm to lazy

I use any lump charcoal, I can buy at the time I'm at the store, mostly whatever Walmart has. It definitely your prob, a new one that's less sensitive

I made the larger gravity feed from smokerbuilder.com and others on here have made the mini and I'm pretty sure they have had no issues with it. Not much needs to be done to them, and that's why I think your TC is likely the issue. I have a TC that the protective cover came of, although it...

What type of gravity feed do you have? My gravity feed did not need any PID tuning. I use the stock PID just fine. I think you may have other issues with you heatermeter. Your graph looks odd, looks like static or noise and is not stable. Does you TC have exposed wires where the two wires...

I wanted too, it it's too late now......

1st I had a 9 pound butt, at 630am I put on a 35 pound suckling pig Double Pan Gravity Smoker Rd25 damper Stock PID settings http://gravityfeed.servebeer.com/luci

If you have a 3d printer then you can get the zero case on thingiverse. https://www.thingiverse.com/thing:1700586

Can't really answer your questions, but I was more curious that you actually still have a old Linkmeter set up and it works. I'm not sure whatever happened to mine, I think I still have the board somewhere, though.

If you want to control the heatermeter from your phone off network, I use a free service called NoIp.com. you set up the service and then you set your routers forwarding service to point to the Ip of the heatermeter and port 80. Mine is http://gravityfeed.ddns.net Its currently offline though

Click on the " Open it in Customizer" link and you will be able to modify the case and select top or bottom