Search results

Just a thought for quick release.........at the vent, could you replace the nut with a hitchpin, would need to drill a hole for it. Either pin it on the arm end or the tab on vent.

[/IMG]

http://sourceforge.net/projects/win32diskimager/files/latest/download?source=files http://capnbry.net/linkmeter/release/bcm2708/12/openwrt-rpi.zip unzip openwrt, save to anywhere, run win32diskimager, select unzipped file, write

http://tvwbb.com/showthread.php?53310-RaspberryPi-B-Supported-No! http://tvwbb.com/showthread.php?55135-Raspberry-Pi-B

Todays cook......meatloaf and baked apples lump coal, with 1 chimney of lite briqs, 2 chunks of applewood pid....B=0; P=4; I=0.02;D=5; min 10%, max 100% [/IMG]

[/URL][/IMG]

Awesome!!Thanks for all you do!

[/URL][/IMG]

check the diode next to the cat5 jack, can't tell by pic if the band is toward the edge same as the other diode.

Small tear in envelope, no biggy, board together and works. :)

Waiting for my board to arrive, should be next week, but..........tracking shows this, lets hope its only packaging and not the board itself. 2014/09/26 08:09 MISSISSAUGA Item has arrived in Canada and was sent for further processing. 08:09 MISSISSAUGA Item arrived in Canada...

http://www.amazon.com/exec/obidos/ASIN/B00194DVJI/tvwb-20

Todays smoke.........Roast beef, taters and carrots WSM 22.5, Royal Oak Briqs, fan controlled bottom vent, 2 other bottom vents closed, top vent open 1/4. B=0; P=4; I=0.02; D=5; Fan 10% pulse. [/IMG]

:( sorry about that

Potroast, taters and carrots on WSM 22.5 B=0; P=4; I=0.02; D=5 http://192.168.0.103/luci

[/IMG] smoked a meatloaf today, had some trouble holding temp, but all in all it went well. Stock fan, pids = B=0; P=4; I=0.02; D-5; started out with a pit temp of 350 but had trouble holding it, so I dropped down to 325 which seemed good.

even got the servo working, not sure why it suddenly started to work, gremilins I guess lol

ok, got page working, got all working but servo, will try with other board I'm building, Thanks Ralph for you help.

everything other than servo was working earlier today, now it just doesn't do anything with the button, or show temps on my HM page. The LCD is reading pit 79 * but no access to menu or lid open by button. I have reloaded sd card also.

gotta be the board, I get nothing pushing the board button.......no menu or anything.