Search results

This weekend Beer can chicken http://myheatermeter.ddns.net/luci/admin/lm/home

Well if they screwed up the USB-C port then they probably screwed up other things on the board, including wifi, lol. https://arstechnica.com/gadgets/2019/07/raspberry-pi-4-uses-incorrect-usb-c-design-wont-work-with-some-chargers/

48 pound pig and some homemade beans Gravity feed smoker 28cfm blower no damper http://myheatermeter.ddns.net/luci

It also let's the thermocouple display temperature below 32°F, with some adjustments prior to using that functionality of the adapter board.

Making an Asian style pulled pork and the neighbor will soon have a brisket going on. Smoker: Homemade Gravity Feed All stock settings, nothing changed 26cfm blower, no damper http://myheatermeter.ddns.net/luci

The easiest way to get connect to the zero without a lcd would be to just load a new firmware onto the zero and turn it on. If you are looking on your homes wifi, it won't be there, use a phone or tablet that is able to connect to WiFi, phone being the easiest. Look for heatermeter and...

I noticed that bug of the temperature, and I just thought I had an soldering issue, lol

When I was in Chicago, snow never stopped me

Just a guess. One roll of 2 pounds can make about 6+ cases 2 pounds=906 grams=$90 Divide that by 6 and you get $15 abouts. I'd say, it would cost less then $15. But my numbers on how many cases out of s roll of material could be way off, but I expect it to be cheaper then $15

Mouser does have the more expensive 8497 version available, but the ambient temperature is from 25°c(77°F). So, those wouldn't work correctly unless the air temperature outside was above 77°F. I'm going to purchase them from China and hope for the best.

I have been looking for any supplier of the amp, with no luck. Mouser does not expect them until October 2019, digikey is out of stock, arrow is out of stock, everybody is out of stock. I'm about to bight the bullet and buy some circuit boards that already have them soldered and remove them...

Sent ya an email

I use the same blower, as long as you have atleast 1.2+ amp power supply it works fine. The blower is a 28cfm blower. I use it at 100% on my Gravity feed

I have had it seasoning at around 375, without issue, I believe I was alot hotter then that

I put in a turkey yesterday for a cousin's Thanksgiving dinner and after an hour I had issues with my HM and probes. I believe my Gravity feed was alot hotter then the 325°F setpoint, as my door warped Grease deflector spot weld broke, yikes. Anyways, my HM was supper hot also. When my temps...

At work, the owner bought a Lorex 5100 series security system and when I try to log into the system via IP address I keep getting I must download and install plug-in for NPAPI. But, it doesn't work on all browser except Explorer. I also tried to Port forward and logged on my phone and I get...

I have never seen any differences to the various Rpi's. They all perform the same for what we need them to do. If you are experiencing a difference, I would look more at wifi interference, and your network.

The HM can be used without the Pi, But, you would also not have a Wife connection. The Pi is needed for doing data collection, and Internet.

The Rpi needs the SD card in at all times. Without the SD card it does not boot up. Basically, the memory is wiped clean everything you turn off its power and the SD card is its brains. Once SD the SD card is installed, you just leave it installed.

Since I have the double pan, my heatermeter stays pretty cool. It's not hot at all. Mine only gets hot around the fire box area. That being said dont do what I did and route the cat5 cable inside the smoker. My last smoke I tried to hook it up to the blower and my HM would stop working...