Recent content by Riku Naskali

Are the files for HXT900 servos publicly available? Looks like they would be easily available in Europe and I wouldn't want to deal with bad SG's again.

Hi there, While I'm not software-wise that skilled, I think this could be done with Heatermeter & Raspberry Pi Zero W? I think it depends if packages are installed & how's the original OS on that Raspberry Pi... https://zsiti.eu/xiaomi-mijia-hygrothermo-v2-sensor-data-on-raspberry-pi/ I'd...

Okay, I gotta ask.. How the heck do you manage to get the connector soldered & crammed in there in one piece and still function? I soldered two and got them eventually inside two Microdampers, but after all the physical abuse there is a short or something else wrong with them.. The connector...

I don't like to use my HM / fan to light up anything. I prefer to bring the temp up manually and then attach my HM. My experience is that you almost always get overshoot, even with a servo. If I use my HM to bring my BGE up to temp, I always set it to a lower setpoint first and gradually bump...

I have three years on my stick burner, lol :D Hours, not so much... I'm a slow guy to finish projects.

John, How did you find the welding? I read this was your first welding project? I have the same plans and I'm a little intimidated by welding all that thin steel... And in general contemplating my abilities with metal working.. My very first welding project was my RF stick burner, it came out...

Thaks, got it mostly solid now! Only small chunk on two of the corners is infill now, I think it's impossible to get all the dimensions so it would be solid, since there is a radius on the outside corner? Well not impossible, but I would need to play with the corner radius setting quite a bit?

Can somebody say if I'm getting my slicing right? I'm a total noob, just printing a case for me in a library. I don't fully understand the shell thickness / cad wall thickness thing. I customized the case with 3 mm wall thickness and I've setup all of my extrusion widths as 0.5 mm (0.4 mm...

Thanks! I already installed DDNS auto-updater on my computer in the same wifi, but I think I'll make it work on my HM. Since the computer is quite often turned off.

Damn, my router doesn't support any dynamic dns scripts so I guess I'm out of luck atm. BTW, at one time I had a 4G dongle plugged directly into my HM, it worked really well :cool:

The double pan is my winter project as well... However the plans only served as an inspiration, since I need to convert everything to metrics before proceeding. Basically I've had to redraw and rethink the whole model with Sketchup in metric units, I think I've got it mostly right now...

Hi there, Updated my hardware and firmware to latest stable release (14). However there seems to be something broken with the OPKG repos, can't update lists or install luci-app-ddns. Seems that src/gz reboot_linkmeter...

Any change you could do a model that would accept a RJ45 Keystone connector inside it? I know it's going to be lot bigger, but those 4-pin jacks are impossible to find outside Mouser... I ordered some from ebay, but they are too long and won't fit inside the Microdamper assembly. I wouldn't...

Are you running the stock fan? We've borrowed a smaller GF pit once at a competition and found out that at least the BBQ Guru Pit Viper fan didn't have enough oomph for it.

Hey, Does anyone have recommended print settings for this? Printing with Ultimaker 2 and Cura. Would a 0.25 mm layer height be sufficient, I'd like to print this out pretty fast... Edit: it's the original Ultimaker with 0.4 mm nozzle.