Recent content by Michael Pitra

I can confirm that they work on a 4.2.4 board, but with some manual processing. I had to bend 2 pins from a connector called "P2" that would have interfered with the buzzer on the HM board.

Ralph, did you get my eMail?

Reset Config on the HM device itself did the trick. Now it works!

BTW, this is the output of the config page, so I can do nothing there ...

I was not able to find anything in the filesystem, even the rrd file did not contain anything useful. So I tried to restart from scratch: reflashing the SD card and enter WiFi credentials ... but nothing changed. Has anyone seen this error and was able to solve it?

Mine was finished today. After a week or so debugging the missing resonator did the trick ;)

Safari provides better data than chrome: Any idea where I can change the food probe names?

Seems like the following line is scrambled: Looks like the function segLmConfig from lucid/linkmeterd.lua ($LMCF) returns errors.

After setting a password to get root login via SSH the error changes to line 126, col 25. I am trying to find out which file this could be to fix encoding.

On the linkmeter Configuration page I get the following error: What can be wrong with this one?

Correct, the Y1 was missing. Now with the resonator in place "No Pit Probe" is displayed. Yeah! Thanks for your help!

You are totally right. The bag with the resonators was hidden on my desk so I totally missed that one. Let's try it, I will post success or failure later.

No one? Here are photos of the soldering... The LED legs aren't cut off so they can be adjusted to the case, when it's printed. They had to be bent to fit the Pi.

Thanks for sharing. I debugged all pins and found no error, except for the pins where the bounce should happen. Those have either 0V, 3,3V or 0,9V, but steady. If I follow the paths the voltage levels stay the same. I mentioned one funny thing: while measuring for example the Pi connector, Pin...

It's an 4.2.4 board, so this should not be the case. I'm pretty unsure how to start the debugging - are there any schematics on voltage levels I could use? I found some in the forum, but they were for older versions of the board. Thanks for the advice debugging without the Pi attached. I only...