Hi Steve, yes I changed it yesterday to Fan on Start up max 50% and fan max 50%. Fan on above 65% damper full open at 60% I left the 5% between the damper and fan to allow for the temperature to oscillate before bringing the fan on straight away.
Slight adjustment of the PID settings and it...
I have an issue with my Kamado Joe Classic and Microdamper setup where it maintains temperature ok with a degree or two f. But I have found that due to the efficiency of the Kamado the Microdamper spends a lot of its time closed and my most recent smoke came out very bitter.
Top vent daisy...
Hi Bryan I have set up my No-Ip address and have got my router to port forward which I have tested and works. The only issue I am coming across is my Heatermeter IP address keeps changing so the host name needs to be continually updated with the new IP.
Thanks mate I have created an account with no-up will have a crack at the port forwarding tonight. Appreciate the help and understand it is a broad question.
Cheers
Kyle
Hi guys I just built my new HM 4.3.4 all set up and working great. Tuning the PID which isn’t perfect yet. Running Microdamper on a KJ Classic.
My issue is when I am away from the home network I can access the HM. Is there something in the settings I need to do?
Any help appreciated.
So today is completed the Raspberry Zero W pin header. Put everything together and flashed it. I turned it all on and was waiting with anticipation for about 2 minutes thinking I’ve stuffed this up somewhere along the way as nothing was showing on the screen.
I forgot to adjust the screen...
Hi mate, I was going to buy a Smartfire but remembered seeing the Heatermeter forum a few years ago and as a reward for recently Quitting Smoking I needed a project to keep me busy.
Your right about the season. Living in Brisbane now I BBQ all year round.
I bumped into an Aussie BBQ team who...
A brand new Heatermeter V3.4.3 is born.
Cheers Bryan I just need to flash it tomorrow can’t find my SD to Micro SD adaptor then onto testing this bad boy.
That is very cool Bryan if only my wife still let me brew.
Got out of control when I built a keezer and half the street would I line up every weekend at my house.
Hi All
I have been viewing the forum over the last few years and finally settled on building a Heatermeter. Kit ordered from Bryan Cheers.
Love to know how many Aussies are on the forum and using the Heatermeter.
Low and slow BBQ has only recently taken off Down Under I would say it has...