Recent content by JSiravo


 
  1. J

    PID tuning for KJBJ3

    wanted to bump this to start conversation if possible.
  2. J

    PID tuning for KJBJ3

    Hi all, Was wondering if anyone has had success with tuning on the new Kamado Joe Big Joe 3. I just upgraded from the Classic gen 1 Joe and wanted to see if anyone would be able to share their settings. Or do the settings even change? I assumed so since its a bigger kamado which requires more...
  3. J

    Brand New Damper Design - "The Micro Damper"

    Yeah, Bryan. Now that I think about it... you might have directed me to do this a few years back.
  4. J

    Brand New Damper Design - "The Micro Damper"

    I used the bigger size model. Connected all the wire directly to each other which eliminated the use of a jack. Makes it easier. Just use shrink wrap to make sure the wire don’t touch and short. Obviously this will require a bit of soldering. Hope that helps.
  5. J

    UDS Build with a Heatermeter

    Seems Ralph Trimble did something similar to what i thought would be the best method. Here is the post If anyone has any experience let me know if this would be the best solution and if the air actually perforates through all the holes in the copper.
  6. J

    UDS Build with a Heatermeter

    Does anyone have any pictures or directions on how they connected their heatermeter to a UDS? I am looking to plan out my UDS build and want to use my heatermeter for the airflow, instead of the normal method. i tried searching the forum but didn't find any topics. Please feel free to direct me...
  7. J

    The Adapt-a-Damper - Open Source Project

    the capacitor fixed my issue. all is working well. just need to fix the calibration now and should be set. thanks for all the assistance.
  8. J

    The Adapt-a-Damper - Open Source Project

    thanks Jeff and Wbegg ... I will try the capacitor and if that doesnt do it then try buck up for the new servo. i didnt want to buy a new one without getting some feedback. thanks i will try that out.
  9. J

    The Adapt-a-Damper - Open Source Project

    Need some help here. not sure what the issue might be. Testing out the adapt a damper. manual fan. when i put the HM to about 90% the servo wiggs out. pulsates erratically. if i hold it in my hand it appears it vibrates a bit. too much power? i basically have the ethernet connected pins...
  10. J

    The Adapt-a-Damper - Open Source Project

    Ah JST connectors. awesome! thanks!
  11. J

    The Adapt-a-Damper - Open Source Project

    wbegg, what kind of connectors do you use in the YouTube video when connecting from the Ethernet keystone to the fan and servo?
  12. J

    Stable Firmware Release v14

    Yep. it is quite odd. If you would like me to take a video or something just let me know. Do you think i should just reinstall the latest version? would i matter if i was using a Linux machine and chrome? other then that i am not sure why it would have happened either.
  13. J

    Stable Firmware Release v14

    bryan, just noticed an issue with my HM. specs below. issue is when i click the download graph from the bottom left and get "lid open", temps appears to drop drastically but doesnt, and fan spikes. it all happens very quickly. is this a known issue with this build? information below with pic...
  14. J

    Post your live HeaterMeter Cooks

    https://drive.google.com/file/d/1nkW71hOj9XNMjoHcvVAQWPfWZOfNIYHz/view?usp=sharing KJ Classic 2015 using Royal Oak lump P=2 O=.0035 D=6 Quick test run for PID tuning. Holding now at 225 steady now. Will do another run possibly Thursday night as well.
  15. J

    multiple smokers - multiple configuraitons

    thanks Ralph and Steve. @Steve did Brian mention if something would be replacing it?

 

Top