Recent content by Jayzon

16lbs Brisket I started at around 3:45pm PST on Saturday. Hoping to have it ready to pull off by Noon PST on Sunday. Then rest in a cooler for 2 hours and ready serve before Kickoff for Superbowl. A kamado Joe Big Joe 2 with a microdamper This was after 4.5 hours

ah... I see. I did use the TEST button.

Yes tin the servo conductor strands. Don't over do it with too much solder.

Hi Bryan, I was wondering if you noticed a bug in your heatmeter firmware. When configuring alarms, specially an SMS text alert for probe 1 low and high temp alert this is causing the pit setpoint to change. When I set the value to 150F hit save and apply, then enter 165 for high value and...

Buy a new DC power supply. The one that is spec'd by heatermeter.com fits perfect. https://store.heatermeter.com/products/12-volt-power-supply?variant=42630818837

I had some left over sheet metal on a custom range hood install that I kept. I think it is 304SS 18ga polished. I used a jig saw to cut then sanded the edge down smooth with a belt sander clamped to my trusty elcheap Black and Decker Workmate. Template first with a cereal box for size... I cut...

I think it should be fine. Maybe don't restrict max and let it go to 100% The official heatermeter blower has max of 6.5cfm if I remember correctly. Micro Damper by SteveCx is 10.5cfm... I use the similar settings on my big joe 2 with a micro-damper... I've done a smoke at 225F for 8 hours...

Here are some pics... Not sure how to attach pics to this forum, and I stopped using photobucket a long time ago. https://photos.app.goo.gl/yvW6LfEyBpzRhtiY7 https://photos.app.goo.gl/KCVDXQ8qwmoHNB6u8 I printed the microdamper. Sourced all the parts via digikey & amazon. The heatemeter I...

I use a heatermeter 4.3 on my Kamado Joe Big Joe 2. I printed the micro dampener design and use SteveCX's recommended PID settings for Ceramic Kamado style cookers. I run it about 25% open for the top vent.

There is a heatermeter stand on thingiverse https://www.thingiverse.com/thing:1294406 I think it might be for the 4.2 version though

where do you see the 30% discount?

one more question. Is everything just friction fit together? Or super glued together?

Hi Bryan, Did you modify the original design to accept 4 screws to hold the fan down? Or are you just using self tapping wood screws to hold the fan down? I'm tossing in between making this micro damper or the adapt-a-damper and the microdamper is very compelling since the prints are much less...

Hi WBegg, My first post on this forum. I was pointed to here when I asked about a PID controller for my Kamado Joe. I'm looking at getting all the pieces lined up to assemble the heatermeter kit and also a blower/damper. A question on the adapt-a-damper. I have access to a 3D printer. So I was...