Finished my build - all seems to work except a few issues:
* Probe ports 1, 2 and 3 (which has the ambient temperature on it) all work, but probe 0 doesn't work at all. Checked all the solder points, swapped out the probe from a verified working probe on port 1 to port 0. Never anything except "No Pit Probe". What solder points should I check and what else could be causing this? How can I troubleshoot this?
* I have 2x ET-732 probes. They don't seem to work unless they are plugged in half way and never below about 90deg. Is this expected? What would be better probes to buy that work to colder temps and can be plugged all the way in and work to colder temps (meat often goes on at 60-70deg)?
Feel like I am almost there! Thanks for all the help and direction - super excited to get this working.
-Justin
* Probe ports 1, 2 and 3 (which has the ambient temperature on it) all work, but probe 0 doesn't work at all. Checked all the solder points, swapped out the probe from a verified working probe on port 1 to port 0. Never anything except "No Pit Probe". What solder points should I check and what else could be causing this? How can I troubleshoot this?
* I have 2x ET-732 probes. They don't seem to work unless they are plugged in half way and never below about 90deg. Is this expected? What would be better probes to buy that work to colder temps and can be plugged all the way in and work to colder temps (meat often goes on at 60-70deg)?
Feel like I am almost there! Thanks for all the help and direction - super excited to get this working.
-Justin