Bryan Mayland
TVWBB Hall of Fame
I've pushed up all the changes from the past month to github as well as built new packages and AVR and rPi firmware files with upstream fixes from OpenWrt. LinkMeter package version 5, HeaterMeter 20130228B.
Bug in version 5 alarms version 6 now available with the bug fix.
To update LinkMeter, just install copy and paste the LinkMeter 6 package URL into the web interface System -> Software -> Download and Install Package. Once linkmeter is upgraded, upgrade the AVR firmware from "bundled" firmware.
Bug in version 5 alarms version 6 now available with the bug fix.
To update LinkMeter, just install copy and paste the LinkMeter 6 package URL into the web interface System -> Software -> Download and Install Package. Once linkmeter is upgraded, upgrade the AVR firmware from "bundled" firmware.
Code:
[hm] Add support for 4-line home
[hm] Disable interrupts when switching rx/tx modes to prevent lockups occurring in rf12_xfer from the non-interrupt side
[hm] Alarms must now be 'armed' before ringing by being more than 1 degree from their threshold
[hm] Silence alarms during Lid Open mode
[hm] Non-symmetric alarm thresholds make the trigger seem more accurate
A low alarm set for 100 enables at 101.0 and goes off at 99.9999...
A high alarm set for 100 enables at 98.9999... and goes off at 100.0
[hm] Fix for ITPlus transmitters at exactly 32F
[hm] Move to Arduino 1.0.3
[hm] Disable some unused chip functions, the DIDR0 might actually improve ADC accuracy
[hm] Turn on RF send every 5 seconds by default now
[hm] 20130228 23,918 bytes
[wrt] Include LuCI msmtp configuration package
[lm] Add lcd 4-line home to conf page
[lm] Include a link to the SMTP configuration page on the alarm script page
[lm] Add the alarm scripts to the list of backup files
[lm] Use probe names on the alarm script page, LMGT now supports multiple items per query
[lm] Display the network address of the first ACTIVE interface (on the HeaterMeter toast message)
[lm] Relabel alarm disable to alarm silence
[lm] Reset the JSON to default when linkmeter reloads, prevents stuck alarm indicators
[lm] Fix reset/reboot buttons not working properly after a config change on conf page
[lm] Add alarm low/high to json status
[lm] Change LMSS sends to once every 5 seconds (instead of 3) if nothing has changed
[lm] Home page degrees per hour now use alarm high limits for their targets
Last edited: