I have setup Stokerlog 6 and have Stoker firmware V2.6.0.193 .
If I login directly to the Stoker I get the correct temp readings but with Stokerlog not.
example :
Note, 22-11-2009 9:15:21, Connecting to Stoker...
Note, 22-11-2009 9:15:21, Logging into Stoker...
Note, 22-11-2009 9:15:22, Command: root
Note, 22-11-2009 9:15:22, Command: tini
Note, 22-11-2009 9:15:24, Command: bbq -k
Note, 22-11-2009 9:15:32, Command: gc
Note, 22-11-2009 9:15:32, Command: bbq -t
Note, 22-11-2009 9:15:38, Stoker started at: 22-11-2009 9:15:38
Note, 22-11-2009 9:15:39, Reading Stoker Web Interface...
Note, 22-11-2009 9:16:02, Food Ready
Temps, 22-11-2009 9:17:05,240,230,133
Temps, 22-11-2009 9:18:06,2408,230,1336
Temps, 22-11-2009 9:19:07,2387,230,1334
Temps, 22-11-2009 9:20:08,2378,230,1341
Note, 22-11-2009 9:20:59, Reading Stoker Web Interface...
Temps, 22-11-2009 9:21:09,2378,230,1341
Temps, 22-11-2009 9:22:10,238,230,1341
as you can see it has a problem with the decimal point.
A full degree F is displayed/recorded correct but a 0,1 degree is displayed as a full degree, 2378 instead of 237,8.
Sometimes I also get the message : not enough strings in the Telnet file.
What could be the problem here ?
or do I something terribly wrong
ps.
this gives the Stoker,
Stoker Status
Powered by Rock's Bar-B-Que
Software by kaytat, Version 2.6.0.193
Sun Nov 22 09:41:54 2009
Temperatures in F Blower Available Blowers
390000001A5CCB05
Temp Sensor Description Temp Target Alarm Low Set High Set Blower
Control Sensors
0800001280540D30 231.6 NoneFoodFire NoneBlower 1
Alarm Sensors (None)
Monitoring Sensors
3D0000127FF89130 139.5 NoneFoodFire NoneBlower 1
Temp Sensor Description Temp Target Alarm Low Set High Set Blower
If I login directly to the Stoker I get the correct temp readings but with Stokerlog not.
example :
Note, 22-11-2009 9:15:21, Connecting to Stoker...
Note, 22-11-2009 9:15:21, Logging into Stoker...
Note, 22-11-2009 9:15:22, Command: root
Note, 22-11-2009 9:15:22, Command: tini
Note, 22-11-2009 9:15:24, Command: bbq -k
Note, 22-11-2009 9:15:32, Command: gc
Note, 22-11-2009 9:15:32, Command: bbq -t
Note, 22-11-2009 9:15:38, Stoker started at: 22-11-2009 9:15:38
Note, 22-11-2009 9:15:39, Reading Stoker Web Interface...
Note, 22-11-2009 9:16:02, Food Ready
Temps, 22-11-2009 9:17:05,240,230,133
Temps, 22-11-2009 9:18:06,2408,230,1336
Temps, 22-11-2009 9:19:07,2387,230,1334
Temps, 22-11-2009 9:20:08,2378,230,1341
Note, 22-11-2009 9:20:59, Reading Stoker Web Interface...
Temps, 22-11-2009 9:21:09,2378,230,1341
Temps, 22-11-2009 9:22:10,238,230,1341
as you can see it has a problem with the decimal point.
A full degree F is displayed/recorded correct but a 0,1 degree is displayed as a full degree, 2378 instead of 237,8.
Sometimes I also get the message : not enough strings in the Telnet file.
What could be the problem here ?
or do I something terribly wrong
![icon_confused.gif](http://tvwbb.infopop.cc/groupee_common/emoticons/icon_confused.gif)
ps.
this gives the Stoker,
Stoker Status
Powered by Rock's Bar-B-Que
Software by kaytat, Version 2.6.0.193
Sun Nov 22 09:41:54 2009
Temperatures in F Blower Available Blowers
390000001A5CCB05
Temp Sensor Description Temp Target Alarm Low Set High Set Blower
Control Sensors
0800001280540D30 231.6 NoneFoodFire NoneBlower 1
Alarm Sensors (None)
Monitoring Sensors
3D0000127FF89130 139.5 NoneFoodFire NoneBlower 1
Temp Sensor Description Temp Target Alarm Low Set High Set Blower