New builder Linkmeter Question


 
P

Paul DC

New member
Hi all!

New HM builder here. Many thanks to all who have helped me unwittingly with your great advice and instruction in he forum here.

I have my HM built and up and running connected to a RPi 3. I melted one of the 5 pin female socket during the build so I do not have the button board/lcd attached right now, waiting for replacement part from Mouser.

Anyway, it is running and I can access LinkMeter on my network and my probes are reading. Was just curious about one thing. It seems from the wiki that I should be able to click on the probe names in LinkMeter and change them. I can't seem to do that, I have to go to configuration and change the names there. Anyone know why that might be?

Thanks

Paul DC
 
Make sure you're logged in when you're at the homepage. You should be able to tell if you're logged in because there won't be a "Login" button on the bottom area, and the URL is .../admin/lm/home. Also, the Pit probe can be somewhat hard to click as the temperature overlaps it a little. It is easiest to click on the top half of the text.
 
That took care of it. Thanks Bryan. Great Product and well put together kit!! Waiting for the replacements parts I need and my thermocouple and I will be good to go!

I know there is another thread on this, but is the Pi Zero W snapshot close to coming out? I want to use a zero for this and not the RPi3. Thanks!
 
You must log in or register to reply here.

 

Back
Top