ISO Genesis Gold C parts


 
S

Steven-MA

TVWBB Member
Good Morning All.
I have a Genesis Gold C I just picked up to rehab its really clean with no rot for $20, while I was finishing a genesis Sliver A rehab (I will post those pictures soon)
I am looking for the left side lift up table (it's cracked) and worktable, also I'm looking for the side burn gas hose with the quick disconnect
looks like they cut it off for some strange reason. Any help would be greatly appreciated.
 

Attachments

  • Photo May 20 2025, 10 20 09 AM.jpg
    Photo May 20 2025, 10 20 09 AM.jpg
    250.7 KB · Views: 18
  • Photo May 20 2025, 10 20 25 AM.jpg
    Photo May 20 2025, 10 20 25 AM.jpg
    142.5 KB · Views: 18
  • Photo May 20 2025, 10 20 30 AM.jpg
    Photo May 20 2025, 10 20 30 AM.jpg
    137.4 KB · Views: 19
Steven-MA said:
Good Morning All.
I have a Genesis Gold C I just picked up to rehab its really clean with no rot for $20, while I was finishing a genesis Sliver A rehab (I will post those pictures soon)
I am looking for the left side lift up table (it's cracked) and worktable, also I'm looking for the side burn gas hose with the quick disconnect
looks like they cut it off for some strange reason. Any help would be greatly appreciated.
Click to expand...
Steven, get in touch with Cody Bratton. He has a Gold C that I got a couple of parts from for one of my projects. He may be willing to help you out with yours.
 
You can notify Cody in 2 ways. 1 is by using the @Cody Bratton sign when you post his name in a thread or 2 by clicking on his name and sending him a direct message. Direct messages will show up in the envelope on the header at the top right of this page by your member name.
 
Hi Samuel, sorry for the delay I have a little under the weather lately, but much better today.
The silver A is complete :) I plan on posting the pictures soon. On another note, I was looking for the left side
table and left lift table for the gold C, and the gas hose that goes from the side burner to the quick disconnect on the
manifold if you know of any one, please feel free to reach out. I checked with Cody he didn't have any.
 
Maybe not. I see now from your pic you need the curved ones. The ones in my pics are the square version.
 
Samuel said:
As you can see from the worktable it is missing a rubber grommet
Click to expand...
Good Afternoon Samuel, I'm so sorry for the delay in getting back to you, I'm finally getting back on my feet after being a bit ill for a couple weeks. The round lift table and worktable will fit best, how much would you like for them? You may also PM me and I believe you still have my email. TY, Steven
 
You must log in or register to reply here.

 

Back
Top