Gen 3 performer table height or lip of bowl height?

[DanHoo]

would anyone have the measurement for a 22 inch Gen 3 performer: ground to the table or ground to the lip of the bowl?

Doesn't need to be accurate. within a 1/2 inch or so is fine.

Thanks!

 

[timothy]

33" to the table.
Bowl sits 1" higher.

 

[DanHoo]

Thank you !

 

[Darren Lebner]

I think it would be OK to ask another Performer measurement question here.

Can anyone who owns a recent Performer Deluxe model #1550x001 confirm that the table slants downward toward the caster wheel side of the cart and that lifting that side up by about 1/2 to 3/4 of an inch puts the table - and the grill - level?

If true, that means that replacing the fixed wheels with another pair of casters will level the grill and table out. The bottom of the leg on the wheel side is indeed that much higher off the floor than the leg on the caster wheel side.

Thanks in advance for any input.

 

[timothy]

Mines level.

 

[Darren Lebner]

Mines level.

Thanks. Are the metal leg edges on both sides of the cart a different distance off the ground or are both sides the same?

 

[timothy]

Thanks. Are the metal leg edges on both sides of the cart a different distance off the ground or are both sides the same?

First time I noticed but the big wheel leg is cut shorter then the other. ( maybe 3/8"- 1/2" ? ) by eye.
The top still measures the same from the ground on both sides.