Search results

Sold. Glad to see it go to someone who is new to smoking. Pointed him to this site to expand his knowledge.

Hi All, Looking to make some room for my newly built UDS, so I'm parting with my venerable WSM. I replaced the mid-section with that has a thermostat wire port and added gaskets to the lid and base, making it leak free. It comes with a heavy duty Weber cover and various water pans. It's all...

Final Observation: As the charcoal burns down and the coals get spread out, the temp begins to oscillate. This occurred after 3 hours of cook time with the amt. of charcoal I used. I pulled the middle section of the smoker off and piled the coals together near the fan. Temp oscillations...

Using reg. Kingsford charcoal seems to cure my instability problems. What charcoal are you guys using? I suspect that the problem with natural charcoal is because natural stuff burns hotter but doesn't necessarily burn as steady at low temps as reg. charcoal. Now my WSM and Stoker work...

Interesting comment about the fuel type. I've been using Royal Oak natural and Kingsford competition. Both burn hot and fast. I'll try some reg. Kingsford this w/e. I have a spare charcoal grate that I can use to raise the fire up so that the fan blows under it. I'll just put a brick on the...

Yep, I'm the same way. I had to convince the wife that this wasn't just a gadget for me. It was an important tool for good BBQ. It's hard to argue with Harry's success. Lots of other guys on the circuit use the same combo, too, so it can't be bad. Lookin' fwd. to your report on how it...

+1 Most people I know are happy with their Stoker, including me. It works flawlessly on my Klose. I'm simply having problems with it on my WSM, which means that there is nothing wrong with the Stoker, just my WSM. I suspect it to be airleaks. I bought my WSM used and did too good of a job...

I understand. Stokerlog's only involvement is to be report what I would not otherwise be able to see. I know that the problem is with the WSM. It is a combination of how the Stoker reacts to/maintains the fire, the top vent position and the amount of air leakage. I'm just trying to figure...

Thanks for the response. I had the lid open box checked on the first mopping event. Stoker Log did not detect lid open until 15 minutes later. At that point, Stoker Log (rel. 5) lost connection. Upon restart of Stoker Log, it stabilized the temp. I unchecked lid open and brought the pit...

Sorry, but I don't have permissions that allow me to post a graph. The top vent was open about 1/4, all others are closed. Temp was set to 245. During the test today, I set the temp to 230. The Stoker brought it up to temp fine, temp settled, I opened lid to simulate a mopping event...

I'm currently battling this same problem - wild temp swings on my WSM - and find it quite aggravating. I thought that it might be because the fan (5 cfm) wasn't big enough to stoke the fire properly during the initial short duration fan pulses. I tried a 10 cfm fan figuring that it would...

Hi, I have a 20" Klose backyard and use a Stoker. At the recommendation of John of Rock's BBQ, I got a 25 cfm fan. Never had a problem with it trying to keep temp. A 10 cfm would probably be too small for mine. The one I have has a main chamber that is 50" x 20". Hope that helps.

Amir, I'm about 4 hours into a cook and everything is working flawlessly with 6.6. Nice work!! I do plan to back off the f/w some since I, too, have noticed that the latest version is slower. I love this program though. It really adds a lot of value to the Stoker. Dave

Hi, Amir: Thanks for the edu-macation. Everything seems to be working as designed then. I'll test it on a real cooker today, but I'm expecting all to go well. Btw, I saw an old screen shot of Stoker log, I think on John's site, where the fan graph actually showed two levels, obviously...

Amir, I think you've done it!! Just need to verify a couple of things first. 1. No errors of any sort during testing, but I noticed that after about 1.5 hours of not reaching temp, the fans resort to running constantly. I suspect that is a result of the algorithm used and therefore by...

Amir, I tested 6.5. No more exception errors, but I do notice some other strange behaviour: 1. On starting Stoker Log, during the initialization stage when the program executes cmd. BBQ -t, the Stoker gets reset (acts like it was a power-on reset). Is this supposed to be the case? 2. After...

Hi Amir, Can you give me a feel for what this error means? Is there something that I can check from a system standpoint - hdw./connections, .Net version, network drivers, etc.? I'd like to be able to help out if I can. I'll test 6.4 tonight and let you know.

Another exception after only 15 minutes or so under the following conditions: Running 1 fan w/control and meat temp probes. Probes are old style. Rel .249 firmware and 6.3 stoker log. Hope there is relevant data in this post. Exception data: See the end of this message for details on...

Hi Amir, I double checked the version. It is indeed 6.3. I've uninstalled the program and reinstalled it and will try it again. Thanks for the help.

Amir, See below for exception error details. It took about 20 minutes to occur. Sorry for the data dump, but last few lines of telnet input are included. I saved the entire file if needed. Firmware is xx.249 & Stoker log is 6.3 See the end of this message for details on invoking...