Search results

Or, one could re-start the app.

Click on the field for the IP address first, then press the tab key. Now do a F5 to refresh data.

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Jason Hopper: Hi Ken, I was looking at this by your recommendation to my large reverse flow cooker question on the stoker. Forgive me of my ignorance...

Jason, Read the StokerVersital thread. You can use the stoker to drive a relay that will controll an AC fan. Keep it below 15A and the box can be done for about $20. Of course you'll still need to find a fan, I'd go www.mcmaster.com for that.

The description looked appropriate, 15A load , 4-32 vdc input. Sounds perfect. I had spoken with a salesman at digi-key before I ordered the first relay. I was hoping he knew of one with lug mounts rather than pc board mounts. He pointed me to another solid state relay that was $40 and change. I...

That's what I like about this forum, there's always an expert around when you need one. Thanks John and Amir for your solid advice. Since I really don't want to destroy my Stoker, I have ordered the solid state relay from digikey. One question however. You could not see this, but my device is...

It's been way too long since I studied electronics. Would I need a RC protection on a solid state relay? I thought RC worked only for DC output. I'm way out of the loop. I'd like to continue this, my jerky was great, but I don't want to screw up my Stoker. Thanks in adcance....

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Richard K: I did not try disabling the static IP address since the communication works fine while on the network. I guess I could try that, but can't...

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Jim Bloomfield: This has a lot of possiblities. Controling the fan by way of a outlet would let you use a bunch of fans or guru fans with the direct...

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Richard K: Still no joy here guys. I upgraded the firmware on my primary router to dd-wrt, and was able to port forward/translate from the port I...

I've taken my Stoker to a new level. I have assembled an electrical outlet box that is controlled by the stoker via a 5vdc 15a power relay. I cut the stoker fan cable at the fan, then put a female mini-plug on the fan and the male counterpart on the cord. I then put another female mini plug on...

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by D Casten: Ok, I closed off the opening in the picture above. Then loaded up the firebox with a full bag (18lbs) of charcoal. Set the stoker to 220. You...

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by RobM (YankeeRob): Ken, You should be able to use your bridge just as you are now I would think. It's all based on standard protocol right? I would...

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by RobM (YankeeRob): <BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">BTW port 23...

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by RobM (Yankee Rob): <BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">And then...

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Rick Schuebel: Ken, Where do I forward port 8081 to on the router, or do I? I have port 80 forwarded to the Stoker at 192.168.1.50. Thanks Rick...

If you are having to use an upper port like 8081, you have to list that with the ip address. ex 54.123.12.156:8081 , in this case, you'd have to use the http interface.

I've used a couple of the wireless bridges and once configured, only the end device is relevant. It's like a wireless adalpter on a laptop, it's just a go-between to the lan device. In that reguard, if you can configure your bridge and establish communication between it and your router, I don't...

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Richard K: Rick: I am not following your logic. Let me reiterate, that the communication with the Stoker works perfectly so long as the device I am...

Sure you can. It doesn't know who or where you are and doen't care. of course that means someone else could mess with you, so.....