Search results

Hi, I have been having good success with my rotodamper 3, but I tried something new today which puzzled me. I set the minimum fan speed to 10% to try to keep my wood chips smoking, but as soon as the temp was above target the fan dropped to 0%. Does that setting not constrain the minimum fan...

Happy holidays Ralph and thank you so much for letting me be an early tester of the RD3 it has been working magnificently. The regulation and the remote access to both thermocouple and inexpensive thermometers has been a huge help. The only trouble I have had on hot cooks is that the steel tube...

BTW, All I see on the post for the embedded image is a circle with a line through it. I used embed image and used the url right below and it does not seem to work. I am hoping there is some caching delay and if I wait long enough the image will appear :) Sadly I had a nice 10 hour 225 degree...

Here is my latest RD3 Large Green Egg cook: 600 Degree burgers, tailing off after I disconnected the blower. https://flic.kr/p/vLV3Vh My latest PID parameters are: Bias=0 Proportional=1 Integral=.005 Derivative=2 You can see that it is only taking about 40% from the blower to hold 600 degrees!

Spatchcocked Chicken with RD3, also step change tests to 439 and 600 degrees I did some spatchcocked chicken with my new RD3 tonight. Chicken Spatchcocked chicken by webdove, on Flickr Big Green Egg Spatchcocked chicken by webdove, on Flickr RD3 Spatchcocked chicken by webdove, on Flickr...

Actually I want to be able to use my thermoworks meat probes so I need both thermocouple amps at the same time. That was why I connected the RD TC amp to probe 3 on the HM

Fixed it. Rewrote SD card/norestore and started over. Weird that the password got changed.

Peachy. The wiring seems to all work, but today it has decided that the root password is not what it was yesterday. Is there any simple way to reset the root password?

I am about to try wiring my HM 4.2.4 for the RDTCv6. Since I use a Thermoworks 72" 113-041 alligator probe I have no problem reaching my HeaterMeter with it which is in a Rubbermaid chest next to my Green Egg. Therefore I plan to wire the incoming CAT5 RDTC probes (pins 1, 2) to HeaterMeter...