Search results

I did and connected to the wireless and it appears to be working!

SSID: Meshnet | Mode: Master Wireless is disabled or not associated

Best I can tell I am running an original raspberry Pi. I did the whole WPA2 wireless settings and I am 100% thats correct... I will check out the wired option I can do that pretty easily but didn't know what the benefit was. I didn't know you can scan for networks? Is that a new feature...

I don't know if the zero would work from outside in my block home is that a big antenna and would it work with my 3d printed case? I got the TP link adapter. It has found the adapter but I am still getting the src 192.168.200.1 so not sure whats going on. I will try redoing the config but...

I ordered a new wifi adapter. Is there a "better" or suggested one? I will order that. I think I ordered a TP Link this time around... should be here tomorrow. I don't suspect the config is wrong - Im sure its not the problem. The device isn't loading. I did plug in a keyboard and saw the...

I am assuming the Wifi adapter is done. When I plug it in while on the screen goes blank and the raspberry pi reboots. I ordered a replacement. This unit sits outside in a drawer when not in use and I did see some rust under the magnifying glass.... Neil

Here is the output on the screen. Not sure what to make of it?

Yeah I selected 4.2 heatermeter-bcm2709-stable_14-XXXXXX (1) - - - Updated - - - Yeah I screwed up :)

I'll order another Raspberry Pi. I had a Raspberry pi 3b+ but that doesn't seem to work with Heatermeter 4.2 hardware.... Suggestions? Looks like my current Raspberry Pi is a v1?!

I tried reflashing and had issues but finally got it flashed. Booted and got the rainbow screen and nothing beyond just locked up at it. I found another card and flashed again - and then same problem. Tried with the heatermeter sleeve on and off no difference. Not sure whats going :( Neil

So I opened the case and plugged it in to a display and I get absolutely nothing. The heater meter show no pit probe on its LCD screen. I don't have any display output from the HDMI port. Any ideas? Thanks! Neil

Is the last release from 2017? I definitely have that on there. I will connect it to an HDMI display tomorrow and see whats going on....

Yeah I didn't think it could be so unreliable for everyone - I don't know. Maybe my USB dongle thingie bit the dust. I don't know Im running 4.2 hardware with the thermocoupler. I wasn't sure what else to include in my argument. I thought I have seen the IP address on the display but I...

So I don't get it. I use my heatermeter. Unplug it put it away and fire it back up for the next cook and it just won't connect to the wifi. Its garbage now. I mean I have to take it apart to connect it to an HDMI port and try to figure out what is going on. I brought it inside the house...

Is there some way to acknowledge the alarm on the web interface that would stop the beeping on the box itself?

Yeah and you gotta connect to a hardwired network correct? I didn't know the process. Haven't done it in a long time so I just wanted to get it up and running for a cook. It was a hassle. If you aren't as well versed as the group who continually works with the heater meater it isn't end user...

There problem is that I replaced my entire wifi network so I had to reprogram a new one. In order to do that you have to take apart the darn thing to get to the SD card (which is actually wrong since up until recently the config.txt was totally igrnored). Then I needed to plug in the HDMI so I...

I ended up RTFM and following the directions. I changed the ip of ETH0 and then straightened everything out and it works. It isn't convenient and there should be a way to see the IP of the wifi and there should be a way to change it on the display as well. I realize this is a hobbyist thing...

The wireless and everything will only work if the eth0 is plugged in?!!@!@!@ I am so baffled- tired and frustrated. When is the loki coming out?

Guys I am at wits end! I changed wireless network AP's and the associated name. I had to take the damn thing all apart to get an HDMI connection and a USB keyboard. Anyway I got it plugged in to my hardwired network and I can access everything. I've gone through and redid everything under...