Search results

I guess I spoke too soon. I was successful in getting Wifi communication working, but it will only run for 3 or 4 hours then it stops communicating. I have tried several different adapters plus two different Rpi's and get the same result. I have noticed that when the communication is fine the...

I finally had a chance to work on this again and got it working. I used the SD Formatter tool and did a Full Format (Overwrite) with Format Size Adjustment to get the SD card cleared and then did a fresh install. After that everything worked like a charm. Thanks for the help!

I was going to try this, but I don't see how to remove the radios. There is a "Scan" button and an "Add" button on the Network-Wifi page, but there is no button to delete or remove the entries.

Yes in fact I have three Edimax adapters, four WU715N adapters and two RT5370 adapters...adapter poor huh? Out of all of these, exactly one works and it is one of the Edimax's. I have done a lot of testing, I have used every security configuration setting on my Router. WEP-Open, WEP-Shared...

I am 99% sure that I am running the latest release of both. I know that I have access to HeaterMeter Device Manager, which was released with Linkmeter v12 right?

Yes, I just built a 4.2.4 board and installed the latest software. I tried several attempts at getting these to work with no luck. I put both of them in my laptop and they worked just fine, so I know it is not the devices.

I have two of these and have not been able to get them to work.

I have two 4.0 boards on-hand that I can build and sell if anyone is interested. I can also build 4.2 units but will have to order boards for these.

That would indicate an ambient temp of about 97 degrees F. That does not sound right, I would double check all your component values and look at solder joints, especially pins 2 and 3 of the AD8495, make sure they have a good solid ground connection. Pin 2 is a Reference input to the...

I would like to know what you find out. I also have a UDS with a 3/4" intake but use a servo driven damper made out of PVC pipe as posted here by another member.

I just went ahead and ordered them. My order showed up today and the part is installed.

Would anyone here be willing to trade three of the PCC-SMP-K connectors for two ATMEGA328P-PU IC's? I am trying to get away from paying $6 shipping for $6 worth of parts at Newark. I wish they offered USPS First Class shipping for small items.