Search results

If you take a look on thingiverse, that is the basis for most of the RAMPS cases that people have posted for the last several years. Some look like what you drew, others are just triangular without the slight rise. I use one on my RAMPS 1.4 and makes it easy to get to make board adjustments when...

Are you looking for a kit or are you willing source parts?

The case is not difficult to print but it will test how well you have your machine tuned. If you look at the reprap forums, you will find lots of people posting pictures of vases, yodas, and other irregular objects to show off their printers. The one thing all of these have in common is that...

That's badass. Can you list the parts you used?

Just laying on my aluminum build plate and lining the perimeter with bulldog clips.

Soapy water with a squeegee will help you. But I would ditch it altogether for an Ultem Sheet. You can get them on amazon or mcmaster.

I believe you and I do owe you an apology for my reaction. I think the things that we have all done with 3d printing on this forum are pretty special and I hope we continue to do that for years to come. Sorry again.

If it's merely a coincidence then I apologize. You just have to understand how it looks from my vantage point.

The timing seems a little coincidental. And you're correct, I was designing for the upcoming 4.24 board. But I was simultaneously making a design especially for you and Bryan who have 4.23 boards which are slightly different.

The push fit and single probe jack wall were not part of my design. It's the overall design, new LCD bezel, measurements, etc. that is a bit frustrating to see presented in a "new design", when I sat in front of a computer for several hours preparing files for this person. Imagine if I took...

It must have been pretty challenging designing your case from the 3d files I was sending you all weekend as I redesigned it for you. Way to show some integrity by passing it off as your own.

In principle, but you would have plenty of other places for the water to get in like inputs/outputs, button, etc.

Sure, why not? How is the fit Bryan?

Don't worry about getting it straight. The LCD fits snugly in a socket so it can only go in one way.

I placed a bezel around the LCD. I have 2 options that I am back and forth on. One where the bezel goes to the edge of the display and one where it opens a bit more to see the metal bezel of the LCD itself. I am taking an informal poll. Do you like 1 or 2 better? I am leaning towards 2 because...

I have a mock up of the 4.24 case and by the specs for the display and board, the display in 0.57 mm off center to the right. Obviously this is imperceptible to most people but I just want to make sure that I am correct in my calculation. The only thing I am unsure of is for the 4.23 board, is...

Of course I will. It's still going to be a day or 2 though before I send it to you guys.

Bryan, Ralph's board has the LCD offset 0.635 mm compared to the semi-final version that I am modelling, correct? If so, Ralph, I will be sending you a custom stl that only fits your board but it will be able to judge the fit of all the other components.

This is actually going to be fine for what I am working on. I am trying to have the LCD fit into a socket that then places a bezel around the border so that all you see is the screen and none of the metal parts of the LCD. I think it's going to look cleaner, but we'll have to see.

Those work fine, thanks!