Search results

I once had same problem, but I forgot to plug in the probes. Just a thought.

to run as administrator, right click on the win32 icon, it will show there.

when you measured with the meter, the buttons wheren't facing down and being pushed by any chance?

yes, either way there are 4 probes; 1 pit and 3 meat probes.

At one time, I used the following on my WSM22.5...............sink drain (what sits at the bottom of a kitchen sink); attach a piece of drain pipe (the one with threads and nut, metal about 4" long)' attach your fan to plain end of pipe, and screw this to drain. Add a gasket to top of drain and...

pick up an old woolen army blanket and wrap the WSM in it for winter cooks.

there was no need to remove the sd card, if you go to heatmeter.com/devices; you can add your login info there(under download). Other than that, I'm not able to help.

Check that you don't have the damper too tight on the servo, as in the screw to tight.

https://github.com/CapnBry/HeaterMeter/wiki/Servo-Mode

I may be wrong, but thought I saw somewhere here posted..........if you buy from Auber, and you have any problems with the HM, you will have to contact them for help.

looks good so far.

what I use on my WSM 22.5 with Rotodamper B=0; P=4; I=0.02; D=5 Fan pulse; min 0%; max 30%; max at startup Servo 700 - 2110

got it, chrome didn't want to download it.

tried downloading but button no worky.......using download on heatmeter.com/devices.

:D awesome work, many Thanks!!

Thanks Steve.

Got everything in to build the 4.3.3 with Zero w; confused as to what software to load onto SD card?

Stay safe!!

Is the cover screwed down too tight?

your PID settings don't change once you set them, unless you set them to something else. i don't understand your I setting being 11.8%?? my I setting is 0.02 my PID=B=0; P=4; I=0.02; D=5 Fan pulse; min 10%; max 30%; max at startup