Recent content by RoyStepp

  1. R

    HeaterMeter Hardware v4.3.3 and v4.3.4

    10k SMD resistor installed, all good now, thanks again.
  2. R

    HeaterMeter Hardware v4.3.3 and v4.3.4

    I found what I believe to be the self inflicted problem with the thermocouple circuit, the surface mounted 10k resistor closest to the positive lead on the thermocouple connector was damaged. I am guessing this was done during the soldering of the thermocouple lead. Thanks for your help in...
  3. R

    HeaterMeter Hardware v4.3.3 and v4.3.4

    With probe0 set as thermocouple no reading at all, have tried with different k-type T/C's which work fine with my DVOM with has a mini T/C jack. With probe0 set to internal an ambient temp is displayed.
  4. R

    HeaterMeter Hardware v4.3.3 and v4.3.4

    Hi Bryan, I recently put together a HM 4.3 which I purchased from your store, followed very detailed easy to follow instructions, unfortunately the thermocouple output is not working. I have used it for a couple of cooks with the other probe jacks, which is fine, but I would like to rectify the...

Top