Recent content by HansvanHorne

Hi all, I recently tried replacing my Pi 1 model B+ with a new Pi3 model B+, but the Pi 3 doesnt seem to boot at all. I see 4 long blinks on the green LED and 7 short ones, which seem to point to Power failure type B according to...

I solved it by finding a different solution. I exit from DAKboard using alt+F4 on the pi hosting dakboard, and then open the heatermeter page via chromium browser.

it reports "unable to connect to the server"

Seems like something is going wrong using the letsencrypt script: but I'm not sure what to make of this.

I think I understand what the problem is. I also inquired with DAKboard, and they answered me the following: I am sorry to hear you are having trouble. We found that you have HTTPS enabled on your site but the security cert has expired. Because of this, our system will not be able to embed this...

Hi all, I have a dakboard running here at home (dakboard.com), and was planning to add a window/block inside it which is embedding the heatermeter local website. The way it works is that you define a certain area in this dakboard, and then you refer to the website you want to embed. Turns out...

Fixed :) I think ultimately what fixed it was using the right solvent. I previously used ethanol and turpentine, which did not do the trick. Today I used 96% alcohol ketatonus. First I used a tooth brush and scrubbed the circuit board and components, then I applied a liberal amount top and...

I used Velleman SOLD100G6 which has a resin core, but I also believe I might have used S-39, which I understand now is not to be used on a circuit board.. I made the following measurements (moving from probe towards ATmega): All measurements were made with ATMega powered up and no probes...

Hi, sorry for the late reply (bit of an understatement haha), but due to the birth of my 2 sons (twins) and Corona this hobby was unfortunately paused for some time. Now I am back at it :) Thanks for the reply, and I did some research using the forum already. I did the following...

Hi All, I just finished assembling the heatermeter kit and seems like I am running into a problem. Without any of the probes connected, I have temperature readouts on all four channels. Pit probe: 287 Food1: 258 Food2: 266 Food3: 304 They fluctuate as well. What I understood is that with no...