Recent content by BSmith-DE

For now this seems to have solved many of my problems too. Perhaps this should be a sticky post or make one noting this issue? A huge thanks for all that have helped me out with their knowledge and input!

A huge thanks for all that have helped me out with their knowledge and input... Ok......for now I cautiously say I found the resolution to the problem after what seems to be an endless search. I found a thread entitled "Heater Meter (R Pi) loses wireless config on every reboot" at...

Ok......for now I cautiously say I found the resolution to the problem after what seems to be an endless search. I found a thread entitled "Heater Meter (R Pi) loses wireless config on every reboot" at...

Still can't get connected to my wifi. I am wondering if this has anything to do with it. What do I need to do with e2fsck?? root@OpenWrt:/etc/config# dmesg | grep mmc [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0xe...

What is the method by which you start your smoker? Did you perhaps start with too few coals with your minion method? I have a UDS and have the luxury of "pre-heating" by opening up my air intakes at the bottom first while I get the racks, etc, sorted out so I haven't ever run into that problem...

I asked a similar question not long ago....I did a test run yesterday with my new HM/LM setup even though I haven't yet been able to connect it to my home WIFI. I used the stock PID settings on my UDS with 4-3/4" holes in the lid and a 3/4 ball valve intake wide open with a 20CFM fan set at max...

Yea...I am done trying different SD cards. I have tried 6 different SD cards. I have tried Micro SD with adapters as well as the larger old school SD card. As far as brands go I have tried SanDisk and Lexar. As far as class of card I have done class 6 and class 10. For sizes I have done 8GB, 16...

Well for some reason after a restart my wifi settings aren't retained in what I assume is the /etc/config/wireless file? I have never been able to use the HM/LM GUI to change from AP mode to WIFI client mode - it has never worked. Is there a system config file I can edit or add that will default...

I am noticing that my HM config.txt gets completely commented restart. As we know this is where the WIFI settings are pulled from. I assume that the /boot/config.txt file has to be the file used for setting up the WIFI each time. Anything I can do to prevent this? Also, is there a way to reboot...

Tried channel 11. Still nothing. Going to try a local unsecure open AP later.

I just tried changing my SSID on my router from "Permanent Vacation" to "skynet" also. No luck connecting to my wifi. I have tried 4 different SD cards in combination with 2 USB wifi adapters. I am about to call it quits and see if anyone will trade up with me. I have spent 20+ hours trying to...

2.4GHZ. Still no luck. :(

Nothing non-standard with my SSID. It's 2 words each with a single capital letter and a space in between...."Permanent Vacation". WPA2 for the encryption method. The crazy thing is that I actually had it connected to my network until I shut down and swapped adapters. I don't know what gives...

Many strange things have happened. I have now spent nearly 20 hours trying to get this setup to work as intended. I tried the "no restore" re-image. When I used that image I couldn't even get HM to act as an Access Point. In other words, I couldn't even connect to it with 192.168.201.1. From...

Micro HC SD Card As for my card I am using Micro HC SD Raspberry Pi 8GB card. http://www.amazon.com/exec/obidos/ASIN/B00ENPQ1GK/tvwb-20