Weber Performer/Stainless Steel table - Retrofit Question


 
P

Patrick Sullivan

TVWBB Fan
I have an old Weber Performer with the stainless steel table. It has an old propane tank that is a smaller tank than today's 20 lb propane tanks. I can't get the old propane tank refilled anymore. Is there a way to retrofit so I can attach the ignition system to a standard 20 lb propane tank? I assume I can buy some fittings at HD or Lowes and be back in business again.
 
timothy said:
Can it be re-certified? I know you could do a switch, seen many posts on it but can only come up with this search.
https://search.yahoo.com/search?p=r...+tank&fr=yfp-t&fp=1&toggle=1&cop=mss&ei=UTF-8

HTH

Tim
Click to expand...

I'm sure someone has a parts list. You just need stuff that fits and is air tight.

This mod is for the Q series grills that use the green gas cans, it might be the exact same parts list you need:

https://tvwbb.com/showthread.php?49713-Weber-Q-low-flame-or-no-flame
 
Thanks for those links. I was able to get it retrofitted using some of those ideas and a few trips to the hardware store. Working perfectly now and nice to have the gas assist working again!!!
 
You must log in or register to reply here.

 

Back
Top