Nick - Nick9one1
New member
Its been a while since I used my heatermeter. I have since moved house and changed routers (new WIFI SSID).
My old SD card obviously doesn't connect. I tried modifying the config file but couldn't get it to work.
So I've flashed a second micro SD from scratch, which does connect.
I then copied the config file from the new working micro SD, to my old microSD, removing the # before the WIFI settings (as below).
It still doesn't connect, but when I read the config file all the # are back? Which presumably means it should have acknowledged the new WIFI settings?
My old SD card obviously doesn't connect. I tried modifying the config file but couldn't get it to work.
So I've flashed a second micro SD from scratch, which does connect.
I then copied the config file from the new working micro SD, to my old microSD, removing the # before the WIFI settings (as below).
It still doesn't connect, but when I read the config file all the # are back? Which presumably means it should have acknowledged the new WIFI settings?
##
## wifi configuration
##
# SSID (network name) -- Case-sensitive!
wifi_ssid='xxxx'
# Password for encryption -- Case-sensitive!
wifi_password='xxxx'
# Encryption mode psk2 (WPA2-PSK default), psk, wep, none
wifi_encryption=psk2
# Mode ap (Acess Point) or sta (Client mode, default). Must be lowercase!
wifi_mode=sta
# wifi channel, only used in AP mode
wifi_channel=6
# wifi band 5 GHz (5) or 2.4 GHz (2), only required in AP mode
wifi_band=2