Search results

I am having problems getting my heatermeter back up and working, Blower works fine but I am not measuring 5V on the Servo power, any ideas?

Has anyone run a heatermeter via POE. At 25W will that be enough power?

I am wanting to replace my HM 4.2 with the 4.3 version (4.2 will be used elsewhere) but I need to be able to bolt the casing to the inside of a thin Aluminium panel on my smoker. With the 4.2 I just DL a design off Thingiverse, but I do not seem to be able to find a suitable one for the 4.3...

I have a feeling that water may have got into my heatermeter (it rained) and it is now not recognising the pit probe, a K type Thermocouple and the display just says "No Pit Probe" Also Probe 2 and 3 are working but Probe 1 is not recognised. But maybe it is the TC that is faulty, what sort of...

I am having problems getting the Thermocouple match the temps given by the thermistor probes. I tested the Thermoworks probes in boiling water and ice water and they seemed pretty accurate. But the thermocouple readings are off, I cannot easily take the TC out to test in BW and IW so I matched...

Any idea what could be causing this? https://photos.app.goo.gl/1VTR3j2gLzYv5Uou8 The servo does this then at other times just moves to 80%ish open and just stalls leaving the vent open.

I have setup my heater meter and it all looks to be working apart from one thing. If I set the fan speed manually then the fan will only start from rest at about 80-85%, you can then throttle down to about 50% but it just stalls below that. I am using a 6A 12V supply. Is there any settings in...

I am trying to build an adapt a damper and I have bought this RJ45 socket which does not have pin numbers but does have these colour codes on each side, it seems to give two alternative schemes, A and B. I would like to avoid connecting the 12V to the servo if possible :). If I connect the...

I have just reconnected my Heater meter (the LCD appears to have failed, missing one third of the display) but I may have more issues. The pit temp is showing about 420f whether or not I have plugged in the probe, and the other thermistor probes are not registering as being connected at all...

My display has stopped showing any info on the left hand third of the display. Presumably I need a new display, or what else should I look for? (It may have got wet.) If I do need a new display what's a compatible part, rather than ordering one from the states when I am in the UK.

I have just bought a BBQ with a heatermeter built in and I am testing things. At the moment the valve is still open when the BBQ has gone over temp. I suspect that the servo horn is not correctly positioned. Is there a way to force the servo to go from fully open to fully closed?

I have just bought a smoker with a heatermeter 4.2 fitted and one of the probes seems to be reading very high. I have checked probe 1 and 3 and they are about right and have calibrated and offset using boiling water as a reference. However probe 2 is reading 360°F, is there something wrong or...