Hi, I just finished building my TC HM 4.3 and my Probe 0 is always bouncing between 60-62 degrees, even with no TC attached. When I attach the TC, there's no change in temp. I even de-soldered my TC and still got the same readings. Any ideas? I'm at a loss...
Hi,
I seem to have a problem with my lid open detection. The fan will start up for one second then die. This happens when my temp drops as well as when I manually turn on the open Lid detection. All other fan operations work without issue.
So far I've tried:
- A new SD card
- A New AT Mega
-...
I uploaded the wrong pic. The second image has been corrected. Everything is working except the switch. I'll redo the soldering on the 2.2k resistor and check it with a multimeter, thanks for the advice!
Hey everyone, I finally got my Heatermeter up and running and everything is great except for the 4 way switch. It works for up, left and right but doesn't do anything when down is pressed. I'm 95% sure I mounted it in the correct position due to the offset so I'm not clear on what's going on...