Hello,
I had a working Heatermeter until this morning when I accidentally rest the configuration. I have wired and wireless comms, but the configuration page says "HeaterMeter serial communication can not be established." When I try to reflash the AVR Firmware from the stored file on the HeaterMeter I get this status screen:
Any ideas what to try next? I've tried downloading and updating from my local computer, but that fails as well.
Thanks,
Mike
I had a working Heatermeter until this morning when I accidentally rest the configuration. I have wired and wireless comms, but the configuration page says "HeaterMeter serial communication can not be established." When I try to reflash the AVR Firmware from the stored file on the HeaterMeter I get this status screen:
Code:
Stopping LinkMeter nil connect
LinkMeter platform is DEFAULT
0a547735921362476f91976c16ededff /lib/firmware/hm.hex
hmdude: compiled on Oct 12 2017 at 13:13:56
hmdude: stk500_getsync(): not in sync: resp=0x00
hmdude: stk500_getsync(): not in sync: resp=0x00
hmdude: stk500_getsync(): not in sync: resp=0x00
hmdude: stk500_getsync(): not in sync: resp=0x00
hmdude: stk500_getsync(): not in sync: resp=0x00
Using port: /dev/ttyAMA0
Loading ihex file: "/lib/firmware/hm.hex" (22744 bytes)
Starting sync (release RESET now)...
Sync: ERROR
Sync: ERROR
Sync: ERROR
Sync: ERROR
Sync: ERROR
Update failed
Starting LinkMeter nil connect
Any ideas what to try next? I've tried downloading and updating from my local computer, but that fails as well.
Thanks,
Mike