Genesis E320 Summit 4 burner going to the scrap yard


 

Bruce

TVWBB 2-Star Olympian
Guys, I need room and need to get a couple parts grills out of my garage/drive way. I have a 2005 Summit 4 burner (NG) and a sidewinder E320. There have been a couple parts plucked from them but still lots of good parts left. If anyone needs any thing, let me know. I will ship them for cost of shipping plus a few bucks for time and effort. Otherwise, I will be forced to pull a few pieces off each and leave the rest for the scrappers.

The summit, other than a nice dent in the control panel is in really pretty good shape. Maybe you can use the NG manifold and hookup? I think the steel panel where the burners come into the cook box is in really pretty good shape. Doors? Handle? hood? end caps, knobs, used but good stamped ss grates, thermometer, wheels, etc..... The grill is pretty well intact minus the tables.

The E320 has the manifold and extra burner gone, but otherwise is in pretty good shape as well. Wheels, handle, lid, end caps, knobs, etc...

Let me know. I know shipping makes it tough, but I would like to see at least parts of these grills survive the scrap heap.
 
Bruce,
Give me a chance to get home this weekend. I have a sidewinder in slow progress. Might be interested in something. Can you let me know about the condition of the frame legs?
 
I am not home to look but I know all 4 wheels are on an solid. I will probably keep them around for a week or so
 
Did the Summit come with a gas hose? I would be interested in that.

What are the dimension of the grates? I have an S320 that's in great shape so I don't think I need any parts for it.
 
I believe the grates are the same length as Genesis Silver and 1000 grates, but they are 2-3" wider per half. The E320 has solid rod Stainless Steel grates.
 
Bruce the grates on that version Summit will not fit an early gen 1 or 2 Genesis. They might fit a generation 3 or 4 Genesis though as the firebox dimensions changed to slightly deeper front to back
 
Bruce, are the flavorizer bars of the Summit still in good shape? And Does this one have the smoker burner and smoker box on the left?
 
Notice the photo of the front inside of the cook box where the burners come in. It looks to be in real good shape and from what I understand, is typically all rotted out on most Summit grills

DbIPRsw.jpg


wMaeeCb.jpg


SoPbJYN.jpg


0C4Dp0S.jpg


XFr3ZUM.jpg


kPjPnC5.jpg


7o5XxCm.jpg


o7Fx6ZS.jpg
 
Last edited:
Bruce, your inbox is full. Please clear it out! Also, let me know your PayPal/Venmo/Zelle/ApplePay/etc address.
 
Jon, the flavo bars are usable, but not in good shape.

Bill, the inbox is open now..
 
Larry, I already started stripping parts off it. It will probably be gone in a few days. I have a big stack of scrap grills and will need to call a scrapper soon to pick it all up. I had to quit today....the damn heat was getting to me.
 
Also, I looked at that panel on the Summit that the burners enter the cook box through and mount to in the back. It is in really good shape and I hear a lot of people complaining that they rot out. This would be a cheap replacement for someone.
 
OK guys, I parted out most of the Summit and the shell is on the curb. I did pull some parts off and would really like to be able to see them used. The stainless shield that the burners go through is discolored but otherwise in great shape. I hear so much about how they rot out quickly, this would be a really inexpensive replacement for a Summit owner. I also pulled the NG hookup off it along with the manifold. I also have stamped steel grates in good shape, the hanging basket as well as the raised warming rack which are both in really good shape. 4 burners that would need some cleaning but still lots of life left in them. I won't keep these parts around forever, but would hate to have someone post that they need any of these parts a week after they went to the landfill.

I know Summit parts are hard to find and usually quite expensive. So, here you go.

de0KDZZ.jpg


bjpeHtU.jpg


WFXIl8k.jpg


- - - Updated - - -

OK guys, I parted out most of the Summit and the shell is on the curb. I did pull some parts off and would really like to be able to see them used. The stainless shield that the burners go through is discolored but otherwise in great shape. I hear so much about how they rot out quickly, this would be a really inexpensive replacement for a Summit owner. I also pulled the NG hookup off it along with the manifold. I also have stamped steel grates in good shape, the hanging basket as well as the raised warming rack which are both in really good shape. 4 burners that would need some cleaning but still lots of life left in them. I won't keep these parts around forever, but would hate to have someone post that they need any of these parts a week after they went to the landfill.

I know Summit parts are hard to find and usually quite expensive. So, here you go.

de0KDZZ.jpg


bjpeHtU.jpg


WFXIl8k.jpg
 
Bump. C'mon guys, I want to clear some space. Anyone interested in E320 parts or those hard to find/expensive Summit parts?
 

 

Back
Top