Low Gas Flow Solved


 

Rex B

New member
I fired up my Weber Q, after not using it for several months, only to discover it had a low gas flow. I tried to "reset" the regulator with no success. So, I took apart the regulator and blew out the oil, cleaned the venturi, made sure the air mixture screen and burner holes were clean and what I discovered, while cleaning the regulator, was that the gas control knob was sticking. To engage the control knob you need to push in and turn--it then returns to the "out" position for lighting the propane--mine wasn't. After ensuring that the knob returned to the "out" position I had full flame. If you can turn on the grill and turn it off without pushing in the control knob you won't have full gas flow. Something to think about.
 

 

Back
Top