Results 1 to 5 of 5

Thread: Heater Meter Parts question

  1. #1
    New Member
    Join Date
    Jun 2017
    Location
    Baltimore, MD
    Posts
    8

    Question Heater Meter Parts question

    Hey guys, Im trying to get a Heater meter setup for WSM 18.5, as well as my Oklahoma Joe Offset Smoker... I figured I can use one unit with different blowers?
    Anyway, I was wondering if you guys could help me with what components I need to get for a good setup with the damper and everything?

    Thanks in advance!

  2. #2
    TVWBB Pro
    Join Date
    Apr 2014
    Location
    Montana, USA
    Posts
    607
    There are plenty of good Damper/Fan designs here to include the RD3 (RotoDamper), Adapt-a-Damper, Micro Damper, and some designs by Tom Kole as well (all of these are in the "sticky" threads). You'll just have to decide how to connect it to your WSM or OJ. Some people use the "dog bowl" method, while others use a Digi-Q adapter, or a pipe nipple to connect.

  3. #3
    New Member
    Join Date
    Jun 2017
    Location
    Baltimore, MD
    Posts
    8

    Question

    Quote Originally Posted by WBegg View Post
    There are plenty of good Damper/Fan designs here to include the RD3 (RotoDamper), Adapt-a-Damper, Micro Damper, and some designs by Tom Kole as well (all of these are in the "sticky" threads). You'll just have to decide how to connect it to your WSM or OJ. Some people use the "dog bowl" method, while others use a Digi-Q adapter, or a pipe nipple to connect.
    So where can I get one of these made?

    Thanks in advance,
    Steve

  4. #4
    TVWBB Platinum Member Bryan Mayland's Avatar
    Join Date
    Apr 2010
    Location
    Tampa, FL
    Posts
    4,439
    Depending on which you want made, there's contact information in each sticky thread for the design. There's also a sticky thread for 3D Printing / Assembly with folks willing to produce dampers / cases / etc.
    I'm that HeaterMeter guy what ruins everybody's free time.

  5. #5
    TVWBB Fan
    Join Date
    Jun 2016
    Location
    Southwestern MN
    Posts
    181
    I'm about to retire a leaky horizontal offset (Oklahoma Joe clone, vendor now bankrupt.) While the HeaterMeter with a Tom Kole V2 barrel damper & fan assembly mounted on a dog bowl made it fairly usable, it leaks like a sieve, especially around the ash drawer. Anything you can do do seal it up will help a lot.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •