timothy
TVWBB 1-Star Olympian
I'd like to give credit to the original post on this but it was in the old forum and it's long gone.
I did it on my 06 OTG and today I tuned up my Son Joshua's Perfomer and decided to take pics.
First flip it over and align the tabs into the slots correctly, and add self-tapping screws ( SS hose clamps were suggested in the OP or SS zip-ties ) I used screws.
Then slide in the pan and make a mark in the locked and unlocked position.
Square those marks up and take off like a 1/4"
I was in a hurry and couldn't find my cut-off wheel so the grinder did a decent job.
But with the proper wheel I did a better job on my 06.
Tim
I did it on my 06 OTG and today I tuned up my Son Joshua's Perfomer and decided to take pics.
First flip it over and align the tabs into the slots correctly, and add self-tapping screws ( SS hose clamps were suggested in the OP or SS zip-ties ) I used screws.
Then slide in the pan and make a mark in the locked and unlocked position.
Square those marks up and take off like a 1/4"
I was in a hurry and couldn't find my cut-off wheel so the grinder did a decent job.
Tim