Page 21 of 22 FirstFirst ... 1119202122 LastLast
Results 201 to 210 of 220

Thread: The Adapt-a-Damper - Open Source Project

  1. #201
    TVWBB Pro
    Join Date
    Apr 2014
    Location
    Montana, USA
    Posts
    570
    A fellow printer of the AD inspired me to print in black and red. I like it ...





    It really shows off the joint. I like it.

    Here's his ..
    Last edited by WBegg; 01-15-2017 at 05:02 AM.

  2. #202
    TVWBB Pro
    Join Date
    Apr 2014
    Location
    Montana, USA
    Posts
    570
    So I've had some requests lately for a 15CFM fan/damper. I've had it designed for a while, and am now offering it on my web page which comes complete with fan and servo and ready to go. Of course, as always, you can print your own as I keep all my designs open source. If you want to print your own, it can be found here ... http://www.thingiverse.com/thing:1272011

  3. #203
    TVWBB Pro
    Join Date
    Apr 2014
    Location
    Montana, USA
    Posts
    570
    So here's the 15 CFM version of the Adapt-a-Damper next to the stock unit. Good for those larger smokers to include large offset smokers. The top guts have been removed to view the guts of the unit. If you want to print your own, go here

    Last edited by WBegg; 02-10-2017 at 11:59 PM.

  4. #204
    TVWBB Member
    Join Date
    Jan 2015
    Location
    New Fairfield, CT
    Posts
    52
    Regarding the 15 cfm versions. A couple of questions:

    1. What is the adapter intended to connect to. I use a 1-1/2" pvc female adapter on a 1-1/2" SST close nipple. Will the adapter fit either in the 1-1/2" pvc fitting, or on a 1-1/2" pvc pipe?
    2. Can the TP SG90 servo be used in lieu of the MG90?
    Last edited by DKellogg; 03-29-2017 at 07:54 PM.

  5. #205
    TVWBB Pro
    Join Date
    Apr 2014
    Location
    Montana, USA
    Posts
    570
    Quote Originally Posted by DKellogg View Post
    Regarding the 15 cfm versions. A couple of questions:

    1. What is the adapter intended to connect to. I use a 1-1/2" pvc female adapter on a 1-1/2" SST close nipple. Will the adapter fit either in the 1-1/2" pvc fitting, or on a 1-1/2" pvc pipe?
    2. Can the TP SG90 servo be used in lieu of the MG90?
    it's designed to fit a BBQ Guru adapter, which i believe is about 1 3/8". No problem for me to whip up an adapter for 1 1/2" pvc (fitting or pipe). Can you measure the OD?

    it will not work with an SG90, as the thickness will not allow the stem to protrude.

  6. #206
    TVWBB Member
    Join Date
    Jan 2015
    Location
    New Fairfield, CT
    Posts
    52
    So I've got a buddy that's going to print for me. From your perspective, do you see a benefit with eith pipe or fitting? If not, i think I'd prefer to have it pipe sized to fit inside a fitting. OD for pipe 1.900". ID for fittings is 1.912" at the entrance and 1.894" at the "bottom".

    http://www.charlottepipe.com/documen...au5V1ZR8vKP09A

  7. #207
    TVWBB Pro
    Join Date
    Apr 2014
    Location
    Montana, USA
    Posts
    570
    The inside diameter of the adapter as is is 1 3/8". It was designed to fit over a BBQ Guru adapter. I can design an adapter to fit your needs if you like.

  8. #208
    TVWBB Member
    Join Date
    Jan 2015
    Location
    New Fairfield, CT
    Posts
    52
    Quote Originally Posted by WBegg View Post
    The inside diameter of the adapter as is is 1 3/8". It was designed to fit over a BBQ Guru adapter. I can design an adapter to fit your needs if you like.
    That would be awesome.

  9. #209
    TVWBB Pro
    Join Date
    Apr 2014
    Location
    Montana, USA
    Posts
    570
    Quote Originally Posted by DKellogg View Post
    That would be awesome.
    Worked up this last night, and did a test print. It fits inside a 2.5" PVC coupling like a charm. It uses 2 O-rings (49mm OD, 41mm ID) that I picked up at ACE Hardware.

    I can send you the STL.


  10. #210
    TVWBB Member
    Join Date
    Jan 2015
    Location
    New Fairfield, CT
    Posts
    52
    That looks great! PM sent

Page 21 of 22 FirstFirst ... 1119202122 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •