Possible to Reset All Software?


 
M

MichaelJF

TVWBB Member
So I've been poking and tweaking the settings in my HM web interface. I was thinking it might be nice to just reset everything to the default settings. Maybe this is a dumb question but how do I do this?
 
If you have access to the webui, you can reset everything in the OpenWrt configuration by just flashing the image .gz file from the System -> Backup / Flash Firmware page and unchecking the "Keep settings" box. The HeaterMeter config can be reset using "Reset Config" on the device itself.

If you're running the snapshot image then both are reset by the "Reset Config".

If you do not have access to the webui then you need to use the norestore option.
 
Login to the webUI and click on the System tab at the top and then the Backup / Flash Firmware tab underneath it on the right.

On the bottom of the screen under "Flash new firmware image" uncheck the "Keep settings" box.

In the "Image URL (.gz):" box paste the following URL.

Code: 
http://capnbry.net/linkmeter/release/bcm2708/12/openwrt-rpi.gz

OR if you want to run the latest snapshot, which is very stable and I suggest doing so, paste the following URL

Code: 
http://capnbry.net/linkmeter/snapshots/bcm2708/openwrt-rpi.gz

Click on "Download and flash image" and then on the next screen, click on "Proceed" and wait a couple of minutes.
 
You must log in or register to reply here.

 

Back
Top