Mark Swift
TVWBB Member
Hi Guys,
After finally getting my HM Thermocouple version working, I seem to have an issue whereby "no pit probe" is displayed above roughly 450 degrees. If I leave it and it drops below it comes back alive again. I've checked all joints etc and they seem correct, it's also spot on below this temperature!
Any help would be appreciated.
Mark
After finally getting my HM Thermocouple version working, I seem to have an issue whereby "no pit probe" is displayed above roughly 450 degrees. If I leave it and it drops below it comes back alive again. I've checked all joints etc and they seem correct, it's also spot on below this temperature!
Any help would be appreciated.
Mark