Search results


 
  1. P

    HeaterMeter Hardware v4.2.4

    Great to know when I need some in Auckland!
  2. P

    How many Heatermeter/Raspi built so far

    Built one - Wonderful! - Thanks for making it happen!
  3. P

    Is this Fan too small?

    Hi, I'm using the 6.5 CFM fan from Auber in an Extra Large Big Green Egg. Look at the graph below is the fan too small for the size of the egg? I don't expect to do regular cooks with the HM at this high of a temperature (I was seasoning a cast iron grate). Thoughts welcome! -Philip
  4. P

    Alarm Question

    Hi Matt, Could you please post your scripts so others can learn from what you've done? Thanks, -philip
  5. P

    HM version 4 Rpi 3d print case

    Bought the jacks locally... www.jaycar.co.nz Happy to mail some to you!
  6. P

    HM version 4 Rpi 3d print case

    Hi, The case has standoffs for the display I used the two upper ones to secure the display to the case everything else is held in place. Thanks for the tip on the Blower and POW +12v - I didn't look at this detail on the schematic. I used a piece of rubber cut from a cycle tube as a cover...
  7. P

    HM version 4 Rpi 3d print case

    Hi, Success with a standard case from Mouser (same one another member used).
  8. P

    Post your HM4.0 success here!

    Success in a prefab case (some one used by another individual) - See the pics: Probe connection points shown in the image above are incorrect (they where moved to the the right point on the heat meter board) You can see the correct placement in the 3rd image.
  9. P

    Help with Stoker Blower is being disassociated with Temp Probe by all 3rd party apps!

    Hi, 'Main Blower' 'Grate' I will try removing the space... Standby
  10. P

    Great Water Proof Box for Control Units (IP55)!

    Hi, Picture is worth 1000 words... http://www.dri-box.com/design-specification.htm Simple easy and dry - I have the 300 size box and it does the job. -Philip
  11. P

    Help with Stoker Blower is being disassociated with Temp Probe by all 3rd party apps!

    Hi, I've got an issue and would welcome some help! Stoker works without issue when it is running without any 3rd party applications (StokerLog, etc.) As soon as an application changes the blower target temperature the blower is no longer associated with the probe and the blower does not turn...

 

Top