Search results


 
  1. R

    The Adapt-a-Damper - Open Source Project

    Are the files for HXT900 servos publicly available? Looks like they would be easily available in Europe and I wouldn't want to deal with bad SG's again.
  2. R

    Reading Bluetooth LE sensors with Raspberry Pi & Heatermeter?

    Hi there, While I'm not software-wise that skilled, I think this could be done with Heatermeter & Raspberry Pi Zero W? I think it depends if packages are installed & how's the original OS on that Raspberry Pi... https://zsiti.eu/xiaomi-mijia-hygrothermo-v2-sensor-data-on-raspberry-pi/ I'd...
  3. R

    Brand New Damper Design - "The Micro Damper"

    Okay, I gotta ask.. How the heck do you manage to get the connector soldered & crammed in there in one piece and still function? I soldered two and got them eventually inside two Microdampers, but after all the physical abuse there is a short or something else wrong with them.. The connector...
  4. R

    How does everyone use their Heatermeter when lighting their Big Green Egg?

    I don't like to use my HM / fan to light up anything. I prefer to bring the temp up manually and then attach my HM. My experience is that you almost always get overshoot, even with a servo. If I use my HM to bring my BGE up to temp, I always set it to a lower setpoint first and gradually bump...
  5. R

    Off Topic - Build Mod for HM

    I have three years on my stick burner, lol :D Hours, not so much... I'm a slow guy to finish projects.
  6. R

    Off Topic - Build Mod for HM

    John, How did you find the welding? I read this was your first welding project? I have the same plans and I'm a little intimidated by welding all that thin steel... And in general contemplating my abilities with metal working.. My very first welding project was my RF stick burner, it came out...
  7. R

    General 3D Printing Thread

    Thaks, got it mostly solid now! Only small chunk on two of the corners is infill now, I think it's impossible to get all the dimensions so it would be solid, since there is a radius on the outside corner? Well not impossible, but I would need to play with the corner radius setting quite a bit?
  8. R

    General 3D Printing Thread

    Can somebody say if I'm getting my slicing right? I'm a total noob, just printing a case for me in a library. I don't fully understand the shell thickness / cad wall thickness thing. I customized the case with 3 mm wall thickness and I've setup all of my extrusion widths as 0.5 mm (0.4 mm...
  9. R

    Latest stable release and dynamic dns?

    Thanks! I already installed DDNS auto-updater on my computer in the same wifi, but I think I'll make it work on my HM. Since the computer is quite often turned off.
  10. R

    Latest stable release and dynamic dns?

    Damn, my router doesn't support any dynamic dns scripts so I guess I'm out of luck atm. BTW, at one time I had a 4G dongle plugged directly into my HM, it worked really well :cool:
  11. R

    Off Topic - Build Mod for HM

    The double pan is my winter project as well... However the plans only served as an inspiration, since I need to convert everything to metrics before proceeding. Basically I've had to redraw and rethink the whole model with Sketchup in metric units, I think I've got it mostly right now...
  12. R

    Latest stable release and dynamic dns?

    Hi there, Updated my hardware and firmware to latest stable release (14). However there seems to be something broken with the OPKG repos, can't update lists or install luci-app-ddns. Seems that src/gz reboot_linkmeter...
  13. R

    Brand New Damper Design - "The Micro Damper"

    Any change you could do a model that would accept a RJ45 Keystone connector inside it? I know it's going to be lot bigger, but those 4-pin jacks are impossible to find outside Mouser... I ordered some from ebay, but they are too long and won't fit inside the Microdamper assembly. I wouldn't...
  14. R

    PID settings for HeaterMeter 4.2.4 on a Southern Q Limo

    Are you running the stock fan? We've borrowed a smaller GF pit once at a competition and found out that at least the BBQ Guru Pit Viper fan didn't have enough oomph for it.
  15. R

    Brand New Damper Design - "The Micro Damper"

    Hey, Does anyone have recommended print settings for this? Printing with Ultimaker 2 and Cura. Would a 0.25 mm layer height be sufficient, I'd like to print this out pretty fast... Edit: it's the original Ultimaker with 0.4 mm nozzle.
  16. R

    Something went wrong with my trusty HM build, fan output stays on always.

    Well, this seems to be solved, somewhat. The problem ended up being a combination of two things: 1) bad wiring to the fan, probably due to bad rj45 connector. After I sorted that out, the fan works perfectly. 2) most likely the servo is broken, it behaves very weird. Sometimes it turns...
  17. R

    Something went wrong with my trusty HM build, fan output stays on always.

    Okay there definitely seems to be something weird going on with the fan outputs, when I try to measure the voltage from the ground and fan output + pins, the Heatermeter loses power and reboot itself.
  18. R

    Something went wrong with my trusty HM build, fan output stays on always.

    I'll snap some pics of the board and check the fan power connections. Wiring is good, it's been running fine several months through ethernet. I also checked the connectors and they seemed fine...
  19. R

    Something went wrong with my trusty HM build, fan output stays on always.

    Hi there, I don't know what happened, was doing a warm up on BGE and left for a while. When I came back it had massively overshot the set temp, checked everything and the fan was blowing at full force even though HM said 0% output! At first I thought it was software issue, so I reinstalled...
  20. R

    Compiling the Arduino source code for first time

    Hi there, Wanted to try some modifications for the source code, so here I am compiling from source first time... Everything compiled successfully after modifications, so that's a good sign. Just wanted to double check before flashing the .hex from web interface, why does my filename say...

 

Top