Search results


 
  1. E

    Served ribs by Myron Mixon yesterday

    Art District in Miami.
  2. E

    HM version 4 Rpi 3d print case

    Wow, that is real quick. I ordered mine at 8am on 10/12 and I won't get mine until Thursday.
  3. E

    Post your HM4.0 success here!

    Got mine up and running last week, longest time spent was getting the wireless to work properly. Finally got that working with some rearranging of my network IPs and a mixture of VI and the Browser UI after about 3 hours. Ordered my case Monday, hopefully I get it in a couple of weeks.
  4. E

    HeaterMeter v4.0 for RaspberyPi / Standalone

    what is the unit of measure to use with shapeways? mm?
  5. E

    HeaterMeter v4.0 for RaspberyPi / Standalone

    got mine up and running today, need to find a ethernet cable now to setup the wireless connection.
  6. E

    LinkMeter v2 Homebrew BBQ Controller - Part 2

    I've given it a lot of thought actually. What I'd really like to do is have the ability to build OpenWrt for RaspberryPi and then thing should hopefully work with both. The OpenWrt people have said they're not going to port it though, so that may not be able to happen. Another option is to get...
  7. E

    LinkMeter v2 Homebrew BBQ Controller - Part 2

    raspberry pi finally shipping. still planning on migrating to a pi based controller?
  8. E

    LinkMeter v2 Homebrew BBQ Controller - Part 2

    woot, pi just got delivered. I have not been so excited in a long time. looking forward to end of June .
  9. E

    LinkMeter v2 Homebrew BBQ Controller - Part 1

    yep, within minutes the distributer websites crashed. I was lucky enough to get the announcement page about 3 minutes before the scheduled time and then to the RS site without much hassle.
  10. E

    LinkMeter v2 Homebrew BBQ Controller - Part 1

    placed my raspberry pi preorder this morning. ready if this is ever ported over to it in the future .
  11. E

    LinkMeter v2 Homebrew BBQ Controller - Part 1

    I replaced the 1k with a cheap 4.7k from radio shack. It has been running with no garbled text for a little over an hour now, whereas with the 1k it would become garbled within a half hour. I'm hoping this resolves it for good. Thanks.
  12. E

    LinkMeter v2 Homebrew BBQ Controller - Part 1

    I'll grab some resistors at lunch and test this evening.
  13. E

    LinkMeter v2 Homebrew BBQ Controller - Part 1

    Email sent, really appreciate it. The only difference between the V3.1 and V3.2 boards is that the LCD is being driven over an SPI latched shift register instead of the previous 2-wire version. I'm hoping folks will find this a lot more reliable than the original version. EMail me your...
  14. E

    LinkMeter v2 Homebrew BBQ Controller - Part 1

    Is it worth upgrading to the latest schematic over the last? I got the previous version working , however if there are major advantages I think I will rebuild. Happen to have any extra button board PCBs? Thanks
  15. E

    LinkMeter v2 Homebrew BBQ Controller - Part 1

    I ended up JTAGing the router and TFTPing the latest snapshot. Everything is working perfectly now. Thanks for all the help.
  16. E

    LinkMeter v2 Homebrew BBQ Controller - Part 1

    To add to my predicament; I am unable to set a root password so I am attempting to tftp the new bin and reflash the router. However no matter how many times I try (using a switch between computer and router) I cannot get the router on 192.168.1.1. I have tried catching it during the bootwait...
  17. E

    LinkMeter v2 Homebrew BBQ Controller - Part 1

    I got my linkmeter up and running, when I first powered it up every thing was perfect. However after a few minutes the words on the lcd started to turn to gibberish. When I power off for a bit and power up again its back to normal. Any ideas? From this: to this:
  18. E

    LinkMeter v2 Homebrew BBQ Controller - Part 1

    are these the recommended probes? Maverick ET73/ET72 Thermometer 3ft/1m Replacement Probe ET-73 Maverick ORIGINAL "Chamber" Replacement Probe OEM
  19. E

    LinkMeter v2 Homebrew BBQ Controller - Part 1

    I've been searching and I am only able to find mention of it in the eagle file updates. What is the ext33 on the board for?
  20. E

    LinkMeter v2 Homebrew BBQ Controller - Part 1

    Anyone happen to have an extra button board PCB lying around and willing to sell?

 

Top