Search results


 
  1. Peter F

    General 3D Printing Thread

    Left the camera running all night, this is the result; https://www.youtube.com/watch?v=MJF7Nkuoexk
  2. Peter F

    Stable Firmware Release v14

    Yes ! Succes ! Thanks again Bryan. Now, next question (pushing my luck). How can I alter the default settings of the HM? I would like to make the default settings metric and change the probes back to ET72/73.
  3. Peter F

    Stable Firmware Release v14

    Managed to create an outputimage, but what is the next step? I get a non bootable SD card when I flash this image to an SD card (Win32Diskimager). The outputimage is 19.9MB so that seems to be about right but I suspect that something goes wrong with boot and root offsets. head=4 sect=63 +...
  4. Peter F

    Stable Firmware Release v14

    Ubuntu 16.04 LTS I meant that the options after -comp xz didn't work, starting from " -Xpreset "
  5. Peter F

    Stable Firmware Release v14

    Thanks Bryan, this helped a lot! Mksquashfs4 kind of works now and I can create a modified squashsf file. However " -fixed -time `date "+%s"` " still gives an "invalid option" error, But if I delete this last bit I can create the file. I'm traveling at the moment so I don't have access to a HM...
  6. Peter F

    Stable Firmware Release v14

    Now I remember again why I hate linux so much. Ubuntu doesn't know what mksquashfs4 means and if I try mksquashfs instead then everything after "-comp xz" doesn't compute. :mad: Do I need to do this on a RPI running LEDE? or is there an easy way to run LEDE on VMware?
  7. Peter F

    Stable Firmware Release v14

    Not sure that I understand any of this (I'm a hardware guy:confused:) but I'm going to try. I assume that this will need to be done on a Linux box, so step 1 will be setting up VMware on my laptop and create a virtual linux machine. to be continued.....
  8. Peter F

    Stable Firmware Release v14

    It's more then just usercss, the index file is modified and there are two additional jpeg's
  9. Peter F

    Stable Firmware Release v14

    I've made a special layout for the members of the Dutch BBQ-society. This is quite a big group of heatermeter users (150+) and most of them are not so computer savvy. If they lose their familiar web interface every time they do a hard reset then I will be extremely busy fixing their heatermeters.
  10. Peter F

    Stable Firmware Release v14

    Is there a way to modify the contents of /rom? I would like to use my own user interface but this gets overwritten by the default interface as soon as I do a "Reset Config"
  11. Peter F

    HeaterMeter Hardware v4.3.3, v4.3.4, v4.3.5, v4.3.6

    Cool, you've printed the Dutch flag. Thanks
  12. Peter F

    Post your live HeaterMeter Cooks

    http://nosmo.ddns.net:9191/cgi-bin/luci/admin/lm/home Test with my new SMD HM design.
  13. Peter F

    No default configuration

    Hmmm, Could this be a version conflict? When I write the image to a completely wiped SD card and when I flash the AVR with the bundled firmware all seems to work fine. Don't get the "No default configuration" error anymore.
  14. Peter F

    No default configuration

    Same problem here with the new snapshot. A "Reset Config" doesn't reset the password and also shows "No default configuration" on the display.
  15. Peter F

    SMD Heatermeter on a RPI B+? Yes, it can be done......

    D1 is now a RGF1A-E3/67A, this is a SMD formfactor 1N4001 equivalent diode.
  16. Peter F

    SMD Heatermeter on a RPI B+? Yes, it can be done......

    Don't know how I have missed the 1N4001 and C13:confused:. I'll modify the Mouser project asap. 100nF = 0.1uF so the value is OK, although it might be a bit confusing.
  17. Peter F

    Feature request: Reset button

    Bryan, would it be possible to setup one of the buttons to be a "reset to default" button when pressed for >10 seconds? This would be a handy feature for headless heatermeters because with one of those you can't go through the menu to reset. Maybe combine this with a blinking LED when the...
  18. Peter F

    LinkIt Smart 7688 Duo

    Is this a alien communication device for close encounters of the first kind?:confused:
  19. Peter F

    Quick Question about case 4.3

    Have I got news for you? http://www.space.com/3332-nasa-finally-metric.html
  20. Peter F

    Brand New Damper Design - "The Micro Damper"

    Will, I print exclusively with PLA and PETG so ABS is as exotic to me as a polynesian hula dancer 😉.

 

Top