i loaded the pi 3b+ verison again and still nothing(details of img download below). i noticed the led lights do not blink at all, like how described in the earlier post. I've also tried formatting the SD card before loading the img. Thanks for the quick reply after the messageboard blackout...
I'm loading the img off my laptop to the sd card putting it in his PI SD slot. I do not believe the led lights are blinking as you describe but will double check. Yes We have the pi 3+.
What reasons would there be that it is not flashing off the SD card? Another reason I believe it is not...
Friend of mine bought a pre assembled heatermeter. Yesterday i took his SD card loaded the heatermeter img with his network info on there and when we plug in the heatermeter we do not get any attempt of logging on his network. it goes straight to pitprobe temp and thats it. I tried reloading the...
Hi Ralph i don't have a 3D printer i was hoping I can pay you for the parts and shipping for a roto damper? I got one from you last year but need another for a friend. Let me know if you can help me out. Thanks
perfect! thanks guys. I remember when i built the heatermeter seeing guys did dog bowl things but couldn't find the post from last year. This will work perfect. Weekend project!
So I built a heatermeter last year for my crappy sidebox smoker grill. After realizing the heatermeter worked beautiful and my issue was all the heat loss in my crappy smoker i upgraded to the WSM 18 yesterday! This thing is beautiful so i really don't want to cut and drill it to much but I want...
Brinkmann is what i have. gas grill/charcoal/w smoke box combo. for basic things it works fine but getting into the world of slow smoking has been a struggle. no matter how hot i get that side box i struggle to maintain temps above 220 degrees. Even tried putting gaskets all over the grill and...
Last year i got a heater meter set up and love the idea. but my old cheap side box smoker/grill just isn't cutting it. Holding any sort of temperature has the heater meter running 100% and I'm using a ton of wood and charcoal during a cook. So looking to spend $300-$400 to get a stand alone...
I accidentally clicked yes on this and now my ip address is 192.168.201.1 and i can't connect. thermocouple is now way off too. Do i need to redo my sd card? Tried reinserting it to see if it'll load my wifi info but it did not.
Hi I've smoked things over the years and it turned out great but always looking for ways to improve. Have a side firebox set up that I've made some modification too that will soon include a heatermeter. Whats the best way to set up the charcoal? circle where you start one part and let it slowly...
Success!LCD is reading fine probes are reading just need to work on the wifi. going to mess with my network in the am and make sure i put in the correct info on the sd card. Thanks guys
Bryan that is exactly what its doing with the yellow led. Its like you made this thing :) I will tighten up my connections I know i struggled with those lcd ones being so tight and this is my first time soldering boards. Thanks i'll post back after I work on it tonight
Thanks Ralph I will try that tonight. I don't have to load anything on the Raspberry pi right? Out the box i can put the HM loaded sd card in it and connect it to the HM?