Recent content by Kyle Stierwalt

Thanks, I'll give those a try and report back with the results.

Hey everyone, Have a question about my HeaterMeter 3.2 /Linksys WRT54GL controller. Just booted this system for the first time since 2012 and it fired up with no problem. Took some tinkering to get the root password reset, and to get it back on my local network, but all is fine. I'm assuming...

That's good to hear!! I'm actually getting the same errors when I try re-flashing my AVR...I too get this via the webinterface or command-line under Linux. I can not flash AVR and my web interface is not working correctly as I can't update setpoint and or probe type, coefficients, etc; e.g...

Yep! That's it exactly. Good catch, thanks. </div></BLOCKQUOTE>

Thanks, will do.

Thanks, reflashing did fix my LCD issue. Everything is working except I've just encountered a strange behavior and it's a show stopper. When I plug my pit probe in the LCD goes blank and all the lights on the router come on requiring me to remove the pit proble and power on/off. I...

Thanks, Neil, appreciate the help...when I adjust this to the point where "character boxes" show it basically just fills each box with pixels, so I guess I should say each box is black, not blank. I'll take a picture tonight when I get home after work. </div></BLOCKQUOTE>

Have everything done on the PCB and flashed the AVR; the router is up and running with LinkMeter code. Plugged in probes and they are working/registering. Everything works except the LCD, getting power as the back-light is on, but just a blank screen. I've dug around on the forum a bit but...

HA! Did anyone else get their "WRT54G-TM" from this guy today? Mine came in and is actually WRT54G Version 5, junk as far as being a Linkmeter. Dang it. It looks to me like the WRT54G-TM layout is identical to the WRT54GL (with the cutout) except they have 32MB of RAM and 8MB of flash...

Connections look good to me. That's a really nice soldering station you've got there too. </div></BLOCKQUOTE> Thanks for double checking my work Bryan/Daniel. I'm happy with the Hakko FX-888...heats up fast, and love the micro chisel tip it came with, perfect size for the LM PCB.

Can someone please double check this setup; it was a bit unclear to me by looking at some of the pictures. I'm a total novice to soldering/electronics...great project, having fun. Basically soldered the gnd to the single post sticking out, and the others to one of the post on the back.

Thanks, I was finally able to open them, was not grabbing the RAW file. ----------------------------------------------------- Re-posting the below here; accidentally put it over in the old location "HeaterMeter + LinkSys WiFi Router = LinkMeter" Since I was not able to open the brd/sch files...

Thanks Neil. I'm just getting ready to begin the project; I think I have all the parts now and ready to start soldering once my Hakko 888 arrives. The photos are exactly what I needed...very helpful. Thanks.