Recent content by John Case

That was my thought, 1 cable to plug and unplug. I can add extensions at the servo/fan for additional length for the probes.

Ralph, I was considering do the same type of arrangement with at cat5 cable. I was considering also seeing if there were enough wires to also include the probes in the cat5 cable as well. I have to not counted yet to see if there is enough. Thinking now about it I believe the following would be...

Since Bryan upgraded v9 to include more servo control functions (Thanks Bryan!!) I was hoping people would post pictures in this thread of how they are implementing a servo into their setup. I did a search for servo & damper but only found a few pictures of how they implemented the servo (see...

Ralph, thanks! I can always flip it over!

Thanks for the info Bryan!

Colin, Thanks for developing PitDroid, I use it on my smokes to monitor temps.

Bryan, I'm striving to get a constant temp like that. Do you think its possible with a WSM? If I recall correctly your using a BGE?

Did another smoke today, figured I would kind of follow Harry Soo's ribs running at 275 I made an airburner as inspired by Ralph, a little different. I attached it to the underside of the coal grate and drilled the air holes in the sides and bottom. The coals burned much more evenly then with...

I was wondering what would be involved to have a momentary contact switch mounted by the smoker to toggle the Lid Open/Closed function? I built a table for the kettle & smoker. I'm considering locating the LCD on a waterproof panel behind and above the smoker with a push button switch next to...

Thanks, Peter. I was given a suggestion which I like... put drawer sliders on the deck raising up the smoker a little but still with clearance to be able to slide the smoker out from under the table. I'm considering that, or maybe wheels on the smoker if I can get low profile wheels that will...

Good idea, thanks,

I've been looking to build a table to hold both the One Touch Gold 22.5 & the Weber Smokey Mountain 22.5 Driving around last week with the family I saw a large flat piece of maple and some other stuff on the side of the road with a free sign. I said to the wife I could use the big piece of wood...

I've been looking to build a table to hold both the One Touch Gold 22.5 & the Weber Smokey Mountain 22.5 Driving around last week with the family I saw a large flat piece of maple and some other stuff on the side of the road with a free sign. I said to the wife I could use the big piece of wood...

That's interesting!

Silver to gold... One Touch Gold (OTG) has a basket underneath that when you slide the vent handle back an forth the ash falls into the basket. The silver just has a catch pan. The benefit of the OTG is if the wind blows the ash stays contained. Also just remove the basket and dump it. I'm not...