Musky-Hunter
TVWBB Member
I have a pair of butts on now that are on hour #9 and stuck at 167f. I read about 16 hour burns on a single load but I can't get past 9hrs. I've just added a few more briquettes because the temp began dropping with very little fuel remaining.
I started with a single load of Kingsford in a Kingsford chimney. Dumped the chimney on a full ring of Kingsford and assembled. The temp quickly rose to a grate temp of 230 where I held it for the last 9hrs. The top vent open full and the bottom vents open about ?. At the tail end of the 8th hour my fuel began to run out causing temps to drop below 200.
What are you guys/gals doing to get longer burn times?
Thanks.
I started with a single load of Kingsford in a Kingsford chimney. Dumped the chimney on a full ring of Kingsford and assembled. The temp quickly rose to a grate temp of 230 where I held it for the last 9hrs. The top vent open full and the bottom vents open about ?. At the tail end of the 8th hour my fuel began to run out causing temps to drop below 200.
What are you guys/gals doing to get longer burn times?
Thanks.