Stoker on Guru adapter


 

Jim Bloomfield

TVWBB Super Fan
If you have your smoker setup for the Guru and change or want the flexibilty to use either. The picture below shows how to adapt. To the left is the Guru adapter you would have on the cooker. Next is a copper plumbing 1 1/4 inch connector and to the far right is the Stoker adapter 1 3/8 round port adapter.Easily switch to which ever unit you want to use.Adapter Photo
 
Jim, the 1 3/87 round port adapter in your picture is nothing like my Stoker WSM adapter, which is a stainless bowl that attaches over one of the bottom vents with a bolt and wing nut, that the fan attaches to. Is the adapter on the right for another brand of smoker? I wouldn’t even know how to “adapt” my fan to that adapter.
 
Your bowl adapter is from Rock's. The WSM adapter shown in the picture is from the guys at Guru. If you have both a Guru and a Stoker you could just use Guru mounts on all your equipment and swap out Guru/Stokers at will.

But I agree, the setup as shown looks much prettier then the bowl thingy.

-rob
 

 

Back
Top