Pit Meter App & the latest HM Firmware

W

Wayne Ficklin

TVWBB Fan

• Jan 16, 2016

• #1

"Error Unprocessed streaming event peaks." These pop up pretty much constantly. Click OK and it pops immediately back up. Leave it alone and behind it the app seems to perform as normal ...just with that error popped up. I've never dealt with this issue before, and the only thing I've changed is installing the new firmware to get the A/C line input noise filtering capabilities (which seem to be working nicely).

Also, I was getting some SSL errors as well, but I'm not seeing them to include exact error messages now.

HeaterMeter Information
Version 20151026B

iPhone 6, iOS 9.1.

(The web front-end is working perfectly.)

 

Steve_M

TVWBB Guru

• Jan 16, 2016

• #2

Turn off streaming mode in the app for now.

 

W

Wayne Ficklin

TVWBB Fan

• Jan 16, 2016

• #3

That certainly seemed to fix that issue. Now I get "Error Received HTTP Status 400" ...about the same frequency as the other.

 

Steve_M

TVWBB Guru

• Jan 16, 2016

• #4

400 codes are often the result of the client requesting bad info. I'd verify you just have just a name or IP in the hostname field and verify your password. Do you have https enabled? If so, unless you've enabled https on the heatermeter, turn it off as well.

 

J

JerryF

New member

• Jan 28, 2016

• #5

Steve_M said:

Turn off streaming mode in the app for now.

Click to expand...

Thanks, I was getting the same error. I will try this. Was running the app on my iPad and also getting that error. Also have pitdroid loaded on Blackberry

 

W

Wayne Ficklin

TVWBB Fan

• Feb 21, 2016

• #6

I was running the noise firmware, flashed it back to the regular, and still got the error in the PitMeter app. I turned off https (and streaming which was already off as suggested above) and now I don't have the error. I also verified I was using the correct IP & username/password (as evidenced by the fact that the pit meter app was updating (IP) and I could make changes (username/password).)