Recent content by JWywal

Hi all So I just finished assembling my 2nd HM and plugged in the Rpi 5v to test. Configured the probe types in the interface. With no probes plugged in - Probe 1 (TC) and Probe 2 are functioning as expected ('no pit detected' and 'off'); Probes 3 and 4 are reading temperatures. Plugging in...

Probe 1: 9.95 Probe 2: 9.95 Probe 3: 9.52 Pit (TC): n/a I scanned the board with my IR gun: Starting temp: 21*C Temps only went up around the BS170 nearest the 0 ohm jumper (24*C before unplugging) Anywhere else on the board went up marginally, if at all. This was after being plugged in for...

Thanks guys Familial responsibility kept me from playing around with the HM last night. Should get on there tonight to troubleshoot.

1) Good point - ever since I changed it to thermocouple in the settings the 22* went away and displayed the no probe message. I'll confirm the voltage output this evening. I was afraid to apply a voltage to re-test because now all the rest of the components are on the board now and didn't want...

Hi all! I just completed my first build and am encountering two issues. 1) Thermocouple / probes After many years away from soldering components I decided to try my hand at doing my own TC build. First attempt displayed "Pit: 22*" with no probe connected, so I knew I had an issue somewhere...